Electronics Forum | Wed Oct 23 02:08:21 EDT 2019 | bukas
sounds like bad electrolytic capacitor, check if your drivers have any swollen capacitors or otherwise damaged caps
Electronics Forum | Wed Oct 23 15:22:11 EDT 2019 | bk
There should be some other error message also with the hardware initiation error. This will help us narrow down your problem
Electronics Forum | Fri Oct 29 17:48:46 EDT 2021 | artem
Hello, I have found the problem. The capacitors on the PAIB board were leaking. They have even demaged some traces and vias on the PCB and the -5V supply on the PAIB board was not working anymore. Got it working again :)
Electronics Forum | Thu Jul 20 07:40:56 EDT 2006 | ev
I have a TP11 UFP without the hydra option and have had difficulty keeping it running. The latest problem is a hardware iniation problem which in the past was a PAIB board failure which I replaced about one year ago almost to the day. Has anyone seen
Electronics Forum | Thu Dec 30 16:41:48 EST 2010 | dyoungquist
Hi Ev, We are running a TP9-2 which should be very similar to your TP11-UFP. I need a little more information to be able to help. Is it failing on the initialize hardware step? Or is it a different point in the start up sequence that it fails? Wha
Electronics Forum | Thu Mar 19 18:26:30 EDT 2020 | damiendigilin
We just brought a used TP11 having some problems the computer will no longer boot as the 25VDC+ line was reporting over voltage at 31+VDC If we hit enable 25VDC+ on the power unit card it blows the 38+VDC Fuse F8.
Electronics Forum | Mon Oct 12 03:12:42 EDT 2020 | erici
TP11 is always showing the error that E-stop is not released. This happens when we start up the machine. It is basically hit and miss, sometimes will work but most of the time this error will pop up. Any suggestions on how to correct this. Is ther
Electronics Forum | Thu Apr 07 07:17:54 EDT 2005 | cyber_wolf
Colin, At this point you may consider calling in Mydata. I told you the basic things I have seen cause your problems. It sounds as if you may have a bad card, and or short somewhere. Possibilities: XWB Small booster on the front of the computer bo
Electronics Forum | Mon Aug 17 11:35:57 EDT 2020 | artem
Hello, I have some troubles with my MyData TP11-UFP with the precision of the placement. All the parts which are mechanically centered are slightly misaligned. Attached are some pictures of 0603 and a SOT23 part. I have made the calibration but it
Electronics Forum | Wed Apr 06 09:16:31 EDT 2005 | blueflag
Ive just checked all the cables that i can see and there seems to be nothing wrong. Have just put a brand new fuse in to mot z card and it has blown it. machine boots up, initiate the hardware and everything goes ok until it does the z height then i
