Electronics Forum | Wed Aug 13 05:18:40 EDT 2008 | lococost
that's a pretty cool idea, I like some thinking 'outside the box '! 1. I don't think picking it up and placing it will be much of a problem. once the rivet is placed it will be held in place by the paste. However, you would need to make a tray that
Electronics Forum | Thu Aug 04 13:58:20 EDT 2016 | sumote
Does anyone have the technical specifications for the Fuji CP6 and the Fuji IP3? Looking for the placement speed (parts per hour), accuracy, smallest/largest component size, fine-pitch (what size it can do). Our new sales guy is putting together some
Electronics Forum | Fri Aug 05 08:15:39 EDT 2016 | jdengler
The IP3 specs are: PCB Dimensions Max: 508 mm x 457 mm - Min: 80mm x 50mm Thickness: 0.8 to 4.0mm Component Capacity Tape: 74 - 8/12mm Device Locations Tray: 40 Locations Placing Rate: 0.55 sec/component for small chips 1.25 sec/component for ICs
Electronics Forum | Sun Aug 26 12:40:59 EDT 2001 | stefwitt
I would like to enter the discussion by tossing some numbers in. First of all I don�t like the 3 Sigma value. 3 Sigma are 2000 defects per mio. if I remember correctly. This means, if you have 200 components on the board, then every 10 boards have on
Electronics Forum | Mon Aug 08 15:47:15 EDT 2016 | jdengler
You may be able to get the specs from one of the used equipment companies that advertise here. Jerry
Electronics Forum | Tue Jul 05 10:27:34 EDT 2005 | GEB
The nozzles are brand new too (got them friday). 08MPF (0.08") is their part number. I tried using the air kiss feature in the setup mode and found that it blew the nozzle off the nozzle holder, not sure if this is ment to happen in this mode, but t
Electronics Forum | Thu Jun 10 16:23:11 EDT 2004 | davem
Hi Grant, In previous positions I've had experience with the Fuji CP43, CP6, CP642, CP643, CP65, IP3 & QP242. In operating, training and process engineering capacities. Presently, I'm working with 2 SMT lines (in a process engineering capacity) wit
Electronics Forum | Mon Jan 19 09:07:45 EST 2015 | cotinc01
We can offer several nozzles to assist with the placement of 0402/0201 components in the four-spindle head. We offer the 06MPF along with custom ceramic tipped nozzles. Most of our standard nozzles for this head type are less than $125.00 each. Chec
Electronics Forum | Thu Jul 07 07:27:10 EDT 2005 | buchi79
Are you buying nozzles from UIC or other vendor? By the way, what is the component you rejecting? Is it happening to random component or specific one?
Electronics Forum | Wed Jul 20 22:46:41 EDT 2005 | nozzles
we can supply nozzle for varies machine brand,such as fuji,sanyo and so on. welcome to inquiry that!thanks vera http://www.hkenterprise.com/szcomfaje tel:86-755-28091605 ext.805 eskimy1001@gmail.com
