Electronics Forum | Tue Jun 19 11:28:10 EDT 2007 | kpm135
I am fairly new to the MYData machine. The TP11 we have just started generating the following error: W-MIPR-20:System voltage BATTERY measured 14.59V (outside limits). After talking with the operators and reading the manual I believe the problem may
Electronics Forum | Wed Jun 24 14:31:36 EDT 2020 | kumarb
Thank you so much for your comments. It sounds very logical as the probes are indeed the original along with the rest of the insides of this machine (270 hours of on time). The entire module is offset by 50-75 degrees cooler so suspecting that the pe
Electronics Forum | Sat Sep 02 09:59:39 EDT 2000 | Dave F
Hey Gyver: I was just spoofin' ya about the deionized water (DI). Water of any type will probably make your solder connections go white. I posted your question to Dr. Lee on the latest OnBoard Forum. I suggest you check his responses. I short he
Electronics Forum | Thu Mar 01 08:55:35 EST 2001 | Dale Dolan
We are currently reviewing the stencil cleaning process in house, we curently use ISOPROPYL ALCOHOL followed by a rub down with non lint wipe alls ( not good !!).As for drying the screen's, the apertures are blown out with compressed air and left to
Electronics Forum | Fri Mar 02 12:46:32 EST 2001 | billschreiber
Hi Dale, Care should be taken when using compressed air to dry a stencil. Just as high-pressure sprays can bend delicate land mass areas between fine-pitch apertures, so can high-pressure air. In addition, OSHA frowns on the use of high-pressuer a
Electronics Forum | Tue Sep 25 15:11:34 EDT 2001 | Rich Elensky
I have had good experience with the 6500. We used it to inspect both SMD and TH devices. (presence, polarity, correct part) I would suggest you contact CR (now Phton Dynamics) for the latest software. It has some serious improvments over early rel
Electronics Forum | Mon Oct 22 17:47:47 EDT 2001 | davef
We on SMTnet have danced around this component package, but there is not a "background" of knowledge in the fine SMTnet Archives. We in our company use this component package, but have not seen the problems you discuss. [We see other problems.] Th
Electronics Forum | Sat Dec 15 10:01:59 EST 2001 | davef
USE OF XRAY Xray is not used for testing BGA. Xray is an inspection tool, similar to a microscope. Check the fine SMTnet OnBoard Forum. Gil Zwieg from Glennbrook made some good points. Additionally, search the fine SMTnet Archives, where there�s
Electronics Forum | Fri May 31 16:36:57 EDT 2002 | davef
If you know about 'BIG DADDY', you know what I know. A nearby thread [ http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=2&Thread_ID=1678&mc=2&forum_idx=40 ] addressed your question more directly, but certainly didn't drill-down t
Electronics Forum | Fri Jan 17 21:54:31 EST 2003 | iman
Hi CAL, suppose it dun mean much, am sure lotsa other SMTnet'ers enjoy the plyaful debates and info sharing we get to experience when guys like DaveF and urself are onboard the forum, learning is so much more fun! we ain't exactly based in the US o
