Electronics Forum | Mon May 10 18:05:31 EDT 2004 | daman
We are trying to solder a Surface mount relay having lead free finish on the leads. The leads are not getting soldered down during the reflow. The leads also look oxidized (failed our solderability test) but we don't have an option but to use these r
Electronics Forum | Fri Oct 10 14:49:21 EDT 2008 | omid_juve
what is the best solder paste type(RA,RMA,R,WS,...) for removing oxidation from the pins of our parts.
Electronics Forum | Mon Nov 12 01:18:29 EST 2007 | sin4d
Hi, ALL I experience some QFP with wetting issue on the heel of the lead. There is no fillet wetting on the heel which causes reject bt the customer, but not all the QFP. Could anyone pls help what is the causes of this problem, it is due to oxidati
Electronics Forum | Mon Jul 01 15:40:12 EDT 2013 | davef
Walter: The things I'd look at first are: * Temperature of the water wash. I expect the solution to be in the 140-150*F range [Check with your flux supplier for recommended temperatures] * Temperature of the boards when entering the cleaning process.
Electronics Forum | Wed Sep 09 09:57:15 EDT 2009 | mikesewell
You mention silver pcbs - baking will accelerate oxidation/tarnishing of the finish. Solderability will likely go down...
Electronics Forum | Fri Aug 01 08:10:29 EDT 2008 | scotceltic
Has anyone come across a standard or study (JEDEC, IPC) where it has the recommended shelf life outside of a dry box for immersion silver coated PCB's to prevent oxidation from affecting the soldering process (Both reflow and Wave). I know it will
Electronics Forum | Mon Aug 21 10:58:34 EDT 2006 | davef
Pulsar Solder Saver: "The Solder Saver is a unique, handheld tool that scoops dross directly from the surface of the solder wave pot. The dross oxides are instantly separated from the solder using a unique high-speed rotary process system. The newly
Electronics Forum | Wed Mar 05 13:12:33 EST 2003 | msivigny
Hello davide, the biggest advantage you'll find with a complete N2 tunnel is the minimization of oxidation during board preheating. Using only an inerted solder pot allows the oxidation to build up throughout the preheat stages and introduces contami
Electronics Forum | Wed Nov 08 20:22:13 EST 2000 | Dave F
You need to remove the oxide before you can properly solder your [or any] component. Call your flux supplier ask them for a more active flux than you are using and for their recommendations on removing the flux residues.
Electronics Forum | Tue Oct 14 12:45:32 EDT 2008 | omid_juve
no answer?
.gif)
