Electronics Forum | Tue Sep 19 10:18:17 EDT 2023 | majdi4
Hello Luis , see the attached photo ( and it is applicable for stencils 100µm thick )
Electronics Forum | Mon Nov 20 14:50:48 EST 2023 | proceng1
I would love to see photos or a video of what you built?
Electronics Forum | Sun Apr 18 00:07:23 EDT 1999 | Vic Lau
I have experienced some dewetting problem on the photo-coupler's lead. No matter what types (how strong) the pre-cleaner and fluxes I used, still not completely resolve this problem. I just wonder, why this is so common to have dewetting problem on
Electronics Forum | Wed Jan 06 09:38:59 EST 2010 | lynn_norman
Via failure could be caused by cracks in the barrel, or thin plating, or fractures in the traces leading to the vias, . X-ray analysis could pick up a fractured trace and cross-sectioning of the vias could pick up the cracks and thin plating. Secon
Electronics Forum | Mon Jul 01 12:37:38 EDT 2013 | tpost
I do have access to an X-ray but it is only 2-D and it just appears as a black solder joint, not to impressive.. The main question though if it is a reowked solder joint does it still need to show wetting on the lead or can it be covered with solder
Electronics Forum | Mon Jun 20 14:01:37 EDT 2016 | babe7362000
Does anyone know of anyone that would inspect our Finished PCBs using photos for their software, instead of shipping out the PCB's? We have boards that are quite heavy. We need them inspected for thru hole accuracy. Or if you know any software th
Electronics Forum | Wed Oct 24 01:11:03 EDT 2018 | filipblad
Here is a video clip of the issue: https://photos.app.goo.gl/zGfXiPYAhfKFYmN96 and in this clip you can see the solenoids opening if you look closely: https://photos.app.goo.gl/j9ozSVkuNBT2Mxq36
Electronics Forum | Wed Dec 14 10:19:56 EST 2016 | jaktechie
Hello, I am new to this forum but I have a question. We use an Orbotech Discovery Ultra to inspect our photo-tools. We currently use this lint free paper as a contrast material underneath the phototool since the vacuum bed on the AOI is black and ou
Electronics Forum | Thu May 22 08:46:05 EDT 2003 | Henry Lee
Hi I uploaded the photos http://hk.photos.yahoo.com/ee02lyk of the failure samples. The chip-cut and pin-hole were found after the manufacturing process. I initially suspect the crack happened during the reflow process.However, our factory analysis d
Electronics Forum | Tue Oct 02 13:55:12 EDT 2012 | ericrr
OK I can take a hint when asked for a photo. I did not try to take a photo as I thought the close up image would put the picture out of focus, so this is where a bit of graphics works might help explain the problem. When I had a look at the 1206 p