Electronics Forum | Thu Apr 01 22:59:00 EST 1999 | jackie hsieh
dear all: we use the HCFC,manufactored by 3M,for the ultrasonic stencil cleaner.but it's too expensive to us. I think is it possible to use no-volatility liquid for the ultrasonic stencil cleaner? or other solvent? thank for your help jackie hsieh
Electronics Forum | Tue May 26 15:39:16 EDT 2009 | mikesewell
Amkor's MLF guidelines are very similar to Actels. 1 to 1 on the stencil to part pad on the I/O pads, 75% with a grid windowpane, 0.125 mm/5 mil stencil. For example, the Actel area ratio for a 0.3 mm sq. pad and 0.125 mm stencil is 0.6 which seems
Electronics Forum | Mon Apr 05 12:36:53 EDT 1999 | Jim Muckle
Jackie: We ran into some pretty ineresting guys at the Nepcon show who specialize in this area. It may be that they have a solution for you. Company name was Zestron, and the guy I spoke with was Andreas. Seemed very knowledgeable, and was very pl
Electronics Forum | Tue Apr 06 17:01:35 EDT 1999 | Bill Wilson
JNJ Industries just came out with some real cool new chemistries for Ultrasonics at Nepcon called Aquasonic. You can contact them for info at 800-554-9994 | dear all: | we use the HCFC,manufactored by 3M,for the ultrasonic stencil cleaner.but it's t
Electronics Forum | Mon Apr 05 20:24:21 EDT 1999 | jackie hsieh
dear jim, At first, thanks for your kindly help! Could you tell me the e-mail address of Andreas ? thanks again have a nice day! | Jackie: | | We ran into some pretty ineresting guys at the Nepcon show who specialize in this area. It may be that t
Electronics Forum | Tue Apr 06 13:11:22 EDT 1999 | Mike Konrad
I would recommend the following chemistries: Zestron Vigon SC200... Good but very $$$$ (703) 589-1198 Vertex (sold by Petrofirm and Alpha Metals)... Won't last as long as Zestron but must less $$$ (904) 261-8286 Kyzen... Also very good (800) 84
Electronics Forum | Mon Aug 14 13:51:37 EDT 2023 | calebcsmt
I'm actually currently in the process of discussing with stencil MFG regarding the apertures and reduction to see if perhaps it was not optimal for this fine pitch QFN, as just as you mentioned, we have similar products with similar QFNs that do not
Electronics Forum | Mon Aug 14 01:29:49 EDT 2023 | calebcsmt
I have noticed on a recent project, the QFN and SOP solder deposits do not seem very uniform and have been leaving little balls, whiskers and icicles of solder paste coming from some pads which leads to bridges. https://imgur.com/a/lqw5RF1 I have u
Electronics Forum | Thu Mar 28 15:53:49 EDT 2019 | SMTA-Jon
As a CM, we don’t have a lot of input on the PCB layouts we receive. Some engineers/software packages output the paste layer 1 to 1, some do an across the board reduction, and some set each part up individually with different reductions per footprin
Electronics Forum | Fri May 22 08:04:30 EDT 2009 | stevezeva
Have any of you ever worked with Actel's QFN 180? A three row I/O QFN? Actel has a published paper on design and assembly guidelines, but we're finding that they are pretty much generic, and don't really work as well as they lead you to believe. ht
