Electronics Forum | Wed Jul 30 03:03:12 EDT 2014 | torch
cheers turns out it was both, cards needed reseating and also the ram flushed :) its back up and running now :)
Electronics Forum | Mon Dec 22 04:55:41 EST 2014 | bobpan
Swap the amps but first manually check by hand to make sure the z-axis is free to move up and down. Sometimes a part can get stuck in the gears. Good Luck
Electronics Forum | Fri Jul 24 08:00:16 EDT 2015 | bobpan
I don't think that the manual has ever been converted. I have some procedures that may help you. If you have questions or need some information get my e-mail at my website @ www.precision-repairs.com Bob
Electronics Forum | Wed Sep 02 14:58:35 EDT 2015 | derrikf
Steve, Does said phenomena occur at a particular time? Or is it seemingly random? What sensors are you referring to? The door sensors, (as in you have the doors open and the gantries move)?
Electronics Forum | Sat Oct 07 10:16:00 EDT 2017 | tsvetan
1. Secure all linear bearings to not move during the transport 2. Wrap the machine completely with stretch folio to protect from dust and moisture 3. Attach shock sensor to it so when it arrive you can see if it was subject to harsh transport
Electronics Forum | Thu Jun 06 05:29:09 EDT 2019 | heinar
Hallo...Quad have problem with z, going to wrong. Parst to high and can not measuring. No errors. Have some body this problem and solutions? Thank you.
Electronics Forum | Wed Jun 19 10:49:00 EDT 2019 | jamesn
Thanks Bob for the speedy reply I will check these out and let you know Kind Regards James
Electronics Forum | Wed Jul 03 07:49:35 EDT 2019 | daniel_marquette
Got it. Servo tuning is new to us, so we'll try it. When you propose to swap the Y axis amps, do you refer to the driver that controls the Y motors? Thanks,
Electronics Forum | Tue Feb 09 14:32:04 EST 2021 | bobpan
You have to disable some lines in the machine.cfg file. If you do this....save the original before modifying it. I think you disable the gantry/head and the mei for Gantry 2.
Electronics Forum | Wed Feb 10 19:29:45 EST 2021 | bobpan
I found a proper procedure to do this. Its rather long. Go to http://www.precision-repairs.com and email me and i will send it to you. Bob
