Electronics Forum | Mon Jun 19 22:19:40 EDT 2006 | Nathan
Dear All, We plan to setup an assembly line for our small volume production of PCBs (about couple hundred PCBs per week). The board has about 150 components (less than 30 types) and a few BGA and IC (majority is SMT, only few THT connectors). We hav
Electronics Forum | Thu Apr 27 05:22:51 EDT 2006 | slaine
we have a small batch oven. It is does take a long time to cool but we set up an airline that blows in the door when its open and that helped things a lot. looking at the hot plate your thinking about going with, it doesent look like you can program
Electronics Forum | Thu May 27 16:23:12 EDT 2004 | davef
Process Trials Procedures. Standard trials are often conducted on reflow ovens by production engineers during product assessment, machine approval or in process set-up. The following trials are also used by machine suppliers during equipment develop
Electronics Forum | Tue Sep 02 13:30:11 EDT 2008 | hermes
Try this. Basic reflow profile build up and explanation of its parts: ramp-up, soak or no soak, peak, cooling. Good starting point.
Electronics Forum | Mon Oct 03 16:19:22 EDT 2005 | Amol
for backward compatibility applications (such as this), the higher melting temperature alloy (LF alloy) gets the priority in selecting the reflow profile. you are using too low temps for reflow. your LF alloy wont reflow at these temp and you will e
Electronics Forum | Wed Sep 23 03:43:31 EDT 2009 | d0min0
hello, we are profiling with the pcb each day - results are very good with a small delta we made another test board with TC only in the problem places - same good result we tried 500-600 boards on 12 zone machine - zero defects while on standard 6
Electronics Forum | Fri Nov 24 07:10:39 EST 2000 | Chris May
Sarry, Word on the street is that your profile will have to be hotter, maybe up to 20C hotter, I have trialled lead free. The sales guy said, "Right, lets reprofile your oven ! I said, "No, lets try it as it is.....! The results were fine, as the
Electronics Forum | Wed Sep 15 10:55:21 EDT 1999 | Scott S. Snider
| Hi, | | Can someone pls suggest to me the best reflow temperature setting | for a force air convection oven. The details is as follow. | 1) Heller 1700s | 2) 12 zone---6 top and 6 bot | 3) Solder paste --- Qualitek 691 non clean | 4) board size :
Electronics Forum | Thu Aug 24 09:41:46 EDT 2000 | Dr. Ning-Cheng Lee
The optimal profile to choose is determined by the following factors, (1) thermal mass and distribution across the board, (2) reflow temperature range needed for a particular alloy, (3) the nature of flux. When the thermal mass is small, such as cell
Electronics Forum | Fri Oct 07 14:59:07 EDT 2005 | gregcr
Hi Jimmy, We use flat belt exit conveyors. They are set-up to collect the boards and set off an alarm when the belt is full. This allows the boards to come out, but you don't have to pay someone to stand there and catch each board. Also eliminate
