Electronics Forum | Thu Sep 03 22:03:32 EDT 2020 | SMTA-64386139
Both conditions are acceptable for this bottom brazed flat pack package. The solder coverage must be within 0.070 inch of the lead/package interface per MIL-PRF-38535, paragraph A3.5.6.3.4.a. While that requirement could allow for a gold gap near t
Electronics Forum | Mon Oct 10 15:24:15 EDT 2005 | zl3vlf
Hello to all! Our Fuji FIP-3 placement machine has come up with a servo alarm (X2-axis) whenever we try to run the machine. The manuals don't go into a lot of detail as to the cause of this problem, but there is plenty of information on what the X2
Electronics Forum | Tue Apr 17 13:07:17 EDT 2012 | rodrigo
Well... after much headache I found a bad relay contact in M1CR1E. The good news is somehow the axis are no longer jerking. The bad news is that it still does not work. When I turn it on now it shows this: emergency stop (in red) waiting for reset
Electronics Forum | Fri Aug 04 13:47:20 EDT 2006 | pemea1
apples to apples. 20 boards 80 parts top and 10 parts bottom. these boards are done on a semi regular basis (you know the boards are coming to you from an OEM at least three times a month, just no exact schedule). All that is required is pasting..mo
Electronics Forum | Fri Mar 11 09:42:07 EST 2016 | oxygensmd
I am trying to decide how to best dispose of our > old running Siemens equipment. I would like to > get something for them but I am not sure who > needs these older machines I have about 8 > available; any ideas guys? > I am trying to decide ho
Electronics Forum | Thu Oct 04 09:32:23 EDT 2007 | dilbert
Linear drive uses linear motors that have no moving parts, strictly a coil over magnets. "Rack and Pinion" as you call it uses AC servo motors that are driving belts and pullies The linear motor has no moving parts and is faster but generates a lot
Electronics Forum | Wed Aug 21 18:13:21 EDT 2002 | johnlee
Kevin, There are a number of custom integrated systems that perform automated insertion of "odd" components. These system use either a robot or cantilevered X,Y,Z Cartesian motion systems. Our systems have accepted standard and custom component feede
Electronics Forum | Fri Jun 02 14:42:06 EDT 2023 | tommy_magyar
"If for example a customer requested assemblies but never specified their requirements, would MFGs be expected/required to follow parameters from a specific class related to the end use of said product?" Answer: The customer placed an order with you
Electronics Forum | Thu Sep 28 11:16:05 EDT 2000 | Chris May
Quite simply, when the stencil is being auto cleaned, the operator can be doing another element of work. Also as mentioned, the stencil will be thoroughly cleaned as opposed to having any human errors leading to blocked or damaged stencils. The time
