Electronics Forum | Thu Apr 27 18:51:35 EDT 2000 | Doug Philbrick
Rob We could do that for you as well as provide you with a ready to run insertion program for your Universal Axial inserter that will of course match your sequences. You can call me at 770 965-3300. I will be out in the morning on the 28th but will
Electronics Forum | Fri Sep 23 10:34:22 EDT 2005 | Rob
Thanks Base, Yes, we did use the overlap method but we still have problems. Thankfully that product is now obsolete, so until next time.... Cheers, Rob.
Electronics Forum | Thu Sep 22 13:09:16 EDT 2005 | gregp
Thanks for the reply Rob, This we already do. The machine will pick from the most efficient available feeder (assuming multiples of the same part number)...so when you remove the primary it will seemlessly move to the next available. When you re-in
Electronics Forum | Fri Sep 23 09:25:46 EDT 2005 | Base
Hey Greg, As you already pointed out yourself: unless you can do away with covertape pickup-spools (or can figure out a way to empty them without loosing tension on the covertape) your feeders will not be suitable for several consecutive splices. S
Electronics Forum | Thu Sep 22 10:48:08 EDT 2005 | Rob
Cheers Greg, It's unusual to have such direct access to manufacturers & their opinions. I'll tell you what really does get us, and splicing doesn't work well on these occaisions - big SMD connectors, requiring deep pocket feeders. You only get m
Electronics Forum | Fri Sep 23 03:11:31 EDT 2005 | Base
Hi All, I think you're adressing this issue from the wrong angle: What I'm reading is an equipment vendor who has an idea about what the best way of working is (replace entire feeders), and a (potential) customer who thinks otherwise (splicing). The
Electronics Forum | Fri Feb 18 13:15:10 EST 2005 | need help
we are having problem with the flipchip sticking to the tape and reel cover, jumping around the tape pockets, and double stacking at placement during production. Does anybody else have this problem? Does anybody have a solution.
Electronics Forum | Mon Nov 30 21:42:25 EST 2020 | stephendo
We do some of our own tape and reeling. We build a small module then ship it in tape and reel. When we first started I could not get a sample just the gerbers and part data. I asked a few places. But without samples they weren't any help. Except for
Electronics Forum | Tue Feb 24 23:25:03 EST 1998 | Larry
I am looking for a machine to put parts on tape and reel. I am supplied with parts from customers that are on short cut strips for production prototype boards. I would like to put these onto feeders, but they need to be re-taped first. Is there is a
Electronics Forum | Tue Dec 01 20:08:45 EST 2020 | nparo
https://matr.com/ My employer uses this service heavily. We build a high mix of Proto and volume boards. Overall turn around time is good, about a week to ship it there and back depending on what is marked priority. Customer service is spot on, and
