Electronics Forum: ym84 (Page 5 of 6)

Yamaha YM84 S2 / Philips CSM 60

Electronics Forum | Wed Sep 23 08:29:19 EDT 2015 | tercel

Hi, I read about the problem "243 x drift adjustment no good" on a Philips CSM 60 (my type) and other machines of this type. I have the same problem but no manual for the machine to solve it. Do you still have the manual where the "Drift ajustment" i

Re: Philips (Yamaha) Placement Machines Boo's & Cheers

Electronics Forum | Mon May 18 06:33:10 EDT 1998 | Odyssey

I am interested to buy some Yamaha feeders! 8mm, 16mm and 24mm for Hyper series YM-84II. Can You help? | The thread on GSM's inspired this: We have a tough time making the trade-off on GSM's work. The next option we like is the Philips (Yamaha) Em

Problem with y-axis Yamaha84 SMT mounter

Electronics Forum | Tue Oct 25 09:20:10 EDT 2005 | meritajs

Hi, We have problem with y-axis offset at YM84 After setting the ORIGIN machine operate exactly but after sometime y-axis recieves offset bis 5-10mm.After repeated setting ORIGIN Y-coordinat became exact. The same things take place if we operate in W

CSM84 doorway ?

Electronics Forum | Thu Mar 01 17:34:03 EST 2007 | darby

Before you go any further - what do you want to do with this machine? Search the archives for Yamaha Philips cross reference and there is a bit of info there on what they are capable of. Forget about 0402 and they will only do 0603 capacitors with an

Philips CSM84V

Electronics Forum | Wed Mar 21 23:02:04 EDT 2007 | Guest

I did convert YM 84V for 0402, base on my expperience , this approach is not really good.This model were not really meant for 0402 placement. Nozzle H ID is really small and prone to clogging, therefore cleaning every 2 hours is a necessity( not id

Juky 570L or Mark IVc

Electronics Forum | Wed Nov 28 16:15:17 EST 2007 | jmelson

One more concern is "consumables" like nozzles, chuck jaws, etc. On some machines these parts wear rapidly and need frequent replacement, or are very easily damaged and need replacement after even the most minor crashes like a dropped component layi

Need help with Philips CSM84 or YM84

Electronics Forum | Wed Dec 09 10:13:52 EST 2009 | robertorocco

Hi Tom, > > Thank you very much. I saw the MCH > file and printed out. I am still trying to > download the manual. It will take a while. My > intention to use this machine is to mount some IC > with 24mm wide tape. By the way, do you know > any

Yamaha YM84 S2 / Philips CSM 60

Electronics Forum | Thu Sep 24 00:52:41 EDT 2015 | ermani9

Hi.. Move the XY arm to the center of the machine. Turn on the servo then immediately hold “LOWER” then press “ORIGIN”. You should see the message now on the screen “DRIFT CHECK”. The arm will start to drift without an emergency condition occurr

YM-84 Error after power on: 243 Y-AXIS DRIFT ADJUSTMENT NO GOOD

Electronics Forum | Sat Oct 24 10:41:40 EDT 2020 | phomann

Hi, This error popped up while running a panel through the machine. I put the machine into the Drift adjust mode and the y axis was drifting, but not smoothly like the X-Axis was. The Y-axis was drifting but not smoothly. It was more of a jerking mot

Yamaha YV100 Feeders

Electronics Forum | Fri Sep 01 22:44:47 EDT 2006 | dmfausti

I have just been engaged again in SMT pick-n-place machines. My latest exposure is with Yamaha YV100 and YM84. I have been having some problem on feeders, especially on 1206 reel packages and above. The plastic cover on the reel does not peel off eas


ym84 searches for Companies, Equipment, Machines, Suppliers & Information

Dual Lane Reflow Oven

Stencil Printing 101 Training Course
Dispenser Pumps

Real Time Process Control BREAKTHROUGH for Dispensing Industry.
Hot selling SMT spare parts and professional SMT machine solutions

Thermal Transfer Materials.