Electronics Forum: siemens (Page 47 of 81)

Siemens SIPLACE CF - Low vacuum on head

Electronics Forum | Fri Feb 01 11:17:21 EST 2019 | youngbuck

Hi, Make sure to check any cracked, pinched, kinked hoses. Also when taking the whole gantry off there are clear hoses that can get pinched. Also, may want to changed the vaccum measuring board. Is this a S20 or F4,f5 or hs50 Thanks,

Siemens Siplace 80S15 causing Line Controller to hang up, and 80S15 keeps waiting for machine data from Line controller

Electronics Forum | Mon Mar 09 16:28:48 EDT 2020 | sportsradar

Hello Sarason, Unfortunately the machine is no longer supported and we are such a small company we can not afford to replace this machine. Thank you for your advise, I will check for additional parts stuck in the machine (long shot but worth the time

Siemens Siplace 80S15 causing Line Controller to hang up, and 80S15 keeps waiting for machine data from Line controller

Electronics Forum | Mon Mar 09 16:30:42 EDT 2020 | sportsradar

We have the software and our PC has been running the machine for approx 10 years. I just don't know why all of a sudden it decided to have this problem. :( Also I have the software if you think I can reinstall from the diskettes. Will check, and ag

Siemens Siplace 80S15 causing Line Controller to hang up, and 80S15 keeps waiting for machine data from Line controller

Electronics Forum | Mon Mar 16 14:08:44 EDT 2020 | sportsradar

Thank you for your reply. So the machine should preform a zero set without the line controller being turned ON? I never tried starting the machine first so I am unfamiliar with this. Thank you again. This community is great. Sincerely, Katrina

Siemens Siplace 80S15 causing Line Controller to hang up, and 80S15 keeps waiting for machine data from Line controller

Electronics Forum | Tue Mar 17 09:09:34 EDT 2020 | emeto

You should be able to operate/troubleshoot machine on its own. Not sure if you have to switch some key on the back to change the mode, or it will initialize on its own using the last program that has been loaded....it's been awhile. Line computer dow

Siemens SIPLACE HS-60 Errors

Electronics Forum | Fri Jun 26 14:20:54 EDT 2020 | victorzubashev

Great news that you have progress Lazslo! I was sure that the problem you described - is a hardware issue and not Software (MC, SR ...). regarding" pinole of" do you mean sleeves? Please send me an email, so I can help you. victor.zubashev@qbotech.

Placement accuracy

Electronics Forum | Wed Feb 07 11:19:23 EST 2001 | CAL

Precision parts and precision boards are nice for the initial evaluation but are costly for routine monthly accuracy tests. I know for a fact all the Siemens machines leaving Germany are evaluated with precision parts and board and placements are eva

Mydata Pick and place

Electronics Forum | Wed May 09 12:07:52 EDT 2001 | caldon

My personal favorite is the Siemens F series and the UIC GSM platform. Both Siemens and UIC have awesome resources for csp, flipchip and baredie processing - Siemens= Dan Baldwin from GaTech; UIC = George Westby from UIC labs. My second choice would

Re: Siemens

Electronics Forum | Fri Nov 05 17:17:32 EST 1999 | NickMata

Fred, The system will base itself on the information within the GF file. In the GF file you provide the description as to the physical dimensions, features, tolerances and handling for the part. Once the component has picked up the image, it is "see

Re: Siemens S20 Hang Issue

Electronics Forum | Sat Sep 18 02:57:09 EDT 1999 | bach huss

Hi All, I am running 19 Siemens S20 Machine here. I found out that the Siemens Machine once a while hangs. The remedy is reboot the machine. I wonder what is the machine hang rate for other S20 machine else where. Can anyone giv


siemens searches for Companies, Equipment, Machines, Suppliers & Information