Electronics Forum | Wed Jun 18 18:58:10 EDT 2014 | ke6zoy
Hi All, We leadform components for our assemblies in house and have been tinning the leads using a dip methood by hand into a solder pot. by just handling the components during the tinning and cleaning process we are at times damaging the parts/lea
Electronics Forum | Fri Jul 18 03:21:59 EDT 2014 | skipbruce
Hello June The following infomationI find from net for you reference. OSP (Organic Solderability Preservative) 1)Preserves copper surface from oxidation until asse mbly. 2) Very thin coating (100-4000 Angstroms). 3)Applied in a vertical (dip tank
Electronics Forum | Thu Nov 20 16:51:48 EST 2014 | joe98375
gregp: Our PTH process has not changed in many years. Our products are fairly simple as far as electronics goes and everything gets potted anyways. ~90% of everything we build is single sided TH with ~ 100 solder joints per board. Each board is ~
Electronics Forum | Fri Nov 21 11:00:27 EST 2014 | gregp
Hi J_Dub (Joe), Thanks for the input. Sounds like some fairly densely populated through hole assemblies. 100 solder joints per board is up to 50 parts per board (I know you may have DIP's so it could be less than 50). 24 boards in a panel x 50 par
Electronics Forum | Wed Feb 24 14:17:20 EST 2016 | rgduval
I have a customer who is rather inexperienced, and asking us for a solution for them. They have a circuit board that's roughly two inches long by 1/2" wide or so, with component placements on one end of the board. The other end has a trace that I s
Electronics Forum | Wed Oct 24 06:32:18 EDT 2018 | marinaluo96
PCB, PCBA and Materials Procurement services. Our company has won AUDITED SUPPLIER by SGS, ISO9001:2008 and IATF16949:2016 certified, IPC member. 35 assembly lines for bulk order and small volume, 500 staff, 13000㎡, dust-free and static-free works
Electronics Forum | Mon Mar 02 13:06:36 EST 2020 | charliedci
If you add any "flux cored" wire solder to the pot make sure you have ventilation as the flux will burn off and smoke like crazy. This solder pot is like any used in a wave or selective solder, no flux. The flux is added to wire prior to di
Electronics Forum | Wed Feb 01 10:53:56 EST 2006 | edruppert
AMS, Are you aware that you will have to purchase several types of insertion equipment for different part types? You will need an axial inserter, radaial and DIP inserter to cover the gamut of thru-hole insertion. Even then you may not cover oddba
Electronics Forum | Tue Nov 25 18:39:59 EST 2014 | rhcriad
We have an MPM UP2000 stencil printer and have a lot of issues with burned out 6410 driver cards (or driver cards just failing to work). I have looked over these threads and found that this is a common issue with these cards. I understand that thes
Electronics Forum | Tue Jun 26 19:59:08 EDT 2001 | davef
They always tell you to calculate ROI, when they want to blow you off. Do a net search using - calculate ROI. Links to three pretty good descriptions on this are: http://www.dmreview.com/editorial/dmreview/print_action.cfm?EdID=2487 http://www.eval