Electronics Forum | Thu Feb 14 17:00:42 EST 2013 | richardc
I am trying to use Mydata TM8C feeders that work fine on a TP93 running 1.6.18 TPsys but are not recognized by a TP94 machine running 1.4.7 TPsys. I get a green flashing light instead of a solid green. I can initialize the hardware but can not proc
Electronics Forum | Tue Mar 26 11:37:39 EDT 2013 | dman97
Hi Deni, I have access to the online database, but I don't see the option for machine manuals. I only see the trouble shooting guide. 2 of my machines are running a variant of UPS 3.1 on OS/2. The other machine is running an older 1.4 OS/2.
Electronics Forum | Tue Apr 10 04:34:26 EDT 2018 | stephenj37824
I must say so far the yamaha seems to fit the bill. Most of our products are low mix. Less than 6 different components per board. 90% are only 2 lol. So just looking at how the yamaha operates it seems gang picking the same part off 12 feeders seems
Electronics Forum | Wed Dec 19 16:05:10 EST 2018 | ldavis
I created a spray fluxer for our wave solder years ago that is still working well although does consume a lot of flux and is also rather messy. It's cheap and easy though so what the heck, right? I just machined a manifold that will hold four BETE
Electronics Forum | Wed Feb 13 16:38:56 EST 2019 | spitkis2
BTW - in our testing on housings with Sn42Bi57 paste, it took 240 seconds to reach 140C on an aluminum module with a mass of 0.75 lbs. This was from ambient and only using machine preheating before having the top heater turn on to peak at 162C. Sa
Electronics Forum | Thu Aug 08 22:41:30 EDT 2019 | orbitcoms
The pick n place height for component was set to 1.4mm but I had not allowed for pin thickness. I added this (total height now 1.6mm) and I get very few solder bridges now. I might try 1.7 and see if it makes any further differnce
Electronics Forum | Fri Feb 17 16:46:29 EST 2006 | GS
Hi CW, mine is not the answer to your questions, but I suggest you to take a look of the latest level of J-STD-033B (October 2005) The J-STD-033A was from July-2002, and several important points are different from latest level. For instance, in Cha
Electronics Forum | Fri Feb 17 16:50:58 EST 2006 | GS
Hi CW, mine is not the answer to your questions, but I suggest you to take a look of the latest level of J-STD-033B (October 2005) The J-STD-033A was from July-2002, and several important points are different from latest level.For instance, J-
Electronics Forum | Sat Sep 13 08:35:14 EDT 2008 | davef
2.0V at 0.1mA for InGaN product and >1.4V at 0.1mA for AlInGaP product." It's common for ESD protection programs to conform to ANSI/ESD S20.20 - Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiate
Electronics Forum | Thu Mar 28 20:06:53 EDT 2024 | cbeneat
What type head is it? Try changing the internal filters. If it is a low number head, ie: 1-4 on an 8, 1-6 on a 12 or 1-8 on a 16. These can be accessed by pushing the head to the opposite table for removal. Chapter 11, section 11-6 page 11-6.3 in mai
