Electronics Forum | Thu Feb 14 17:00:42 EST 2013 | richardc
I am trying to use Mydata TM8C feeders that work fine on a TP93 running 1.6.18 TPsys but are not recognized by a TP94 machine running 1.4.7 TPsys. I get a green flashing light instead of a solid green. I can initialize the hardware but can not proc
Electronics Forum | Tue Mar 26 11:37:39 EDT 2013 | dman97
Hi Deni, I have access to the online database, but I don't see the option for machine manuals. I only see the trouble shooting guide. 2 of my machines are running a variant of UPS 3.1 on OS/2. The other machine is running an older 1.4 OS/2.
Electronics Forum | Tue Apr 10 04:34:26 EDT 2018 | stephenj37824
I must say so far the yamaha seems to fit the bill. Most of our products are low mix. Less than 6 different components per board. 90% are only 2 lol. So just looking at how the yamaha operates it seems gang picking the same part off 12 feeders seems
Electronics Forum | Wed Dec 19 16:05:10 EST 2018 | ldavis
I created a spray fluxer for our wave solder years ago that is still working well although does consume a lot of flux and is also rather messy. It's cheap and easy though so what the heck, right? I just machined a manifold that will hold four BETE
Electronics Forum | Wed Feb 13 16:38:56 EST 2019 | spitkis2
BTW - in our testing on housings with Sn42Bi57 paste, it took 240 seconds to reach 140C on an aluminum module with a mass of 0.75 lbs. This was from ambient and only using machine preheating before having the top heater turn on to peak at 162C. Sa
Electronics Forum | Thu Aug 08 22:41:30 EDT 2019 | orbitcoms
The pick n place height for component was set to 1.4mm but I had not allowed for pin thickness. I added this (total height now 1.6mm) and I get very few solder bridges now. I might try 1.7 and see if it makes any further differnce
Electronics Forum | Fri Feb 17 16:46:29 EST 2006 | GS
Hi CW, mine is not the answer to your questions, but I suggest you to take a look of the latest level of J-STD-033B (October 2005) The J-STD-033A was from July-2002, and several important points are different from latest level. For instance, in Cha
Electronics Forum | Fri Feb 17 16:50:58 EST 2006 | GS
Hi CW, mine is not the answer to your questions, but I suggest you to take a look of the latest level of J-STD-033B (October 2005) The J-STD-033A was from July-2002, and several important points are different from latest level.For instance, J-
Electronics Forum | Sat Sep 13 08:35:14 EDT 2008 | davef
2.0V at 0.1mA for InGaN product and >1.4V at 0.1mA for AlInGaP product." It's common for ESD protection programs to conform to ANSI/ESD S20.20 - Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiate
Electronics Forum | Thu Apr 08 13:28:24 EDT 2010 | mabdalla
Thanks DucHoang, One more favor. Will really appreciate if you can point us on how to figure out the number of patterns (number of offsets) from the VIOS file. Also we would like to know the feeder types represented by the numbers in the &F sectio