Electronics Forum | Wed Sep 18 15:41:59 EDT 2013 | cbeneat
For 0402's, if the operator is paying attention, our equipment Panasonic CM 402/602/NPM's run at about .001%. Again this is dependent on an operator that pays attention to the fail rate. We usually don't have too many problems with 0402's, LED's ar
Electronics Forum | Thu Oct 23 11:42:37 EDT 2014 | dhollland
Thanks for the replies guys. I don't have anything pressing at the moment but it is nice to know there is a resource out there if needed. Also, I will be willing to try and answer anything I can to help you guys.
Electronics Forum | Tue Oct 20 12:02:47 EDT 2015 | cbeneat
I have never encountered that particular problem. Have you checked the door switches in the I/O to see if one is actually open? Another thing I have encountered is grease getting on the linear scale which will give you errors that are false. I wou
Electronics Forum | Thu Oct 22 03:10:49 EDT 2015 | myleb
I already check that sir, maybe its a loose > connection or board problem. maybe the ssr board was damaged. try swap the ssr between the A and B stage. Open the machine cover at AF/BF stage, it's the down left board with many connectors (have COV1
Electronics Forum | Thu Oct 22 04:45:32 EDT 2015 | myleb
Can you explain: 1. Is mc running normally before problem happens? 2. Any abnormality happens prior to problem? 3. Can you still check input/out put in machine adjustment meno? 4. Can you see all information in Ringload information? 5. If set bad be
Electronics Forum | Wed Dec 13 20:46:46 EST 2000 | Dave F
I�ll bite ... Why can�t you calculate LSL/USL values from your control charts? We find that LSL/USL values generally are unknown. If you are seeking a text on statistical analysis consider: "Statistical Process Control for Surface Mount Technology"
Electronics Forum | Thu Aug 10 03:41:59 EDT 2000 | JohnW
Ok dave so yes your right I'm going to measure the heat capacity for each bank of lamps from 3 wave solder machines so I can try and match the output of each set of lamps so I can match teh machines. As a by product I'm hoping to use it to set up a l
Electronics Forum | Fri Jun 02 17:43:17 EDT 2000 | Dave F
James: I believe Delmat is a proprietary product. Check with some of the solder fixture fabricators in the archives. Continuing, I would not select knowingly Delmat as a board stiffener. It's a composite material similar to oriented strand board
Electronics Forum | Thu Oct 23 07:09:02 EDT 2014 | headlad
Just curious. We use these machines and software > in our facility and I am looking for others that > ideas can be bounced off of when needed....and > trust me, we need it frequently. Hi, We use PT100 and 200 for our CM202, CM402 and CM101 line
Electronics Forum | Wed Dec 09 17:22:09 EST 2015 | tombstonesmt
I couldn't be more pleased with Panasonic. We've upgraded from MPAV's and MSR's to CM602/DT401 and now their NPM platform. NPM's are extremely fast and accurate. Their auto pickup position teach is great especially if you're running any 0402 2mm pit