Electronics Forum | Thu Oct 27 13:31:12 EDT 2022 | proceng1
It's a small screw adjustment. Ours is toward the input side. You can grab one of your boards, manually lock it in, and adjust until the light changes.
Electronics Forum | Mon Sep 10 12:27:32 EDT 2007 | hakerem
Hi Dave - You are correct that I was not clear in my comments. I assumed Joris had seen the usual solder balls accompanying his blowholes. Nevertheless, Joris, my first two recommendations still stand. Increasing the dwell time of your leads in t
Electronics Forum | Thu Jul 05 20:54:27 EDT 2012 | actioncontrols
Hello: We have used our Phillips Topaz on a number of volume jobs and been very pleased. A while ago it became apparent that the vision LED's were growing dimmer as evidenced by having to adjust light intensities upward for various components in so
Electronics Forum | Mon May 06 10:55:30 EDT 2002 | Eric Miller
I am looking for anyone who may have information > on adjustable reflow pallets. Could you please > provide a supplier and contact. My dilema is that > during an initial NPI build the PCB's may not > arrive with rail adds. I need a way to transfe
Electronics Forum | Fri Feb 27 10:12:36 EST 2004 | stefwitt
The front plate of the S15 head gives you access to the signal amplifier boards. You'll find 4 potentiometers adjusting the voltage and the symmetry of track A and B. A digital scope turned to X+Y provides an image of a circle, which is been adjusted
Electronics Forum | Tue Dec 19 16:15:47 EST 2006 | johnw
we have fuji's cp-iv-3 machine made in 1993.we > are facing problem everytime when we change the > jobs(for example we change from pcbA to pcbB to > pcbA)even though program is same. There are some > mechanical adjustments like conveyor adjusted
Electronics Forum | Mon Jan 15 16:14:15 EST 2007 | leemeyer
This is a used oven, new to us. No product has been setup on it yet. We were establishing som baseline profiles and noticed that the actual profile read didn't even come close to our optimal profile. Further investigation proved that the belt was to
Electronics Forum | Thu Oct 02 12:22:26 EDT 2008 | JerryS
Hello Ok there is not much info here. What you have to mae sure of is several key factors. 1. Have you entered the correct stencil thickness. 2. Are you using the stencil gerber (not the paste layer) The paste layer is usually not adjusted for ap
Electronics Forum | Wed Feb 05 21:03:35 EST 2014 | padawanlinuxero
On top of the feeder should be a small cover thats adjustable you need to unscrewed a little and move it forward to the pick up area this should give you enough space to cover the other component another thing you can try is check if all the feeder
Electronics Forum | Tue Aug 11 09:55:49 EDT 2015 | rgduval
I'm no clock expert, but, even that unit you linked appears to have the period set by the weight on the pendulum. That unit notes that the pendulum is adjustable....though, I'm not sure how/what is adjustable...I would expect it to be the weight. I