Electronics Forum | Tue Sep 18 05:22:34 EDT 2012 | sarason
Try this page for the updated machine An FP-100 about 85 psi. for this model. The basic machines are near identical , just newer plastic moldings. I think I ran mine off a car inner tube and a 12V tyre pump, originally. So that would have been a
Electronics Forum | Tue Aug 22 10:47:28 EDT 2000 | Dr. Ning-Cheng Lee
The European WEEE has issued a new (5th) version of its recommendations. In it they say that , on January 1st, 2004, they will review the status of the Pb-Free issue. There is currently NO DEADLINE for implementation. As far as a direct replacemen
Electronics Forum | Tue Jan 31 15:15:13 EST 2006 | russ
Heat guns used improperly will definitely damage components. You must have a controlled heat gun that can be set to the max temp you want pb =215C max, Pbfree maybe 240C max. This heat gun must not be able to be adjusted or you must have total trus
Electronics Forum | Tue Aug 22 03:04:07 EDT 2006 | PP
Any help/suggestion is much appreciated I am doing lots of BGA Reworks from a small uBGA with a few balls to a large BGA with over 1500 balls. The reworks have been done on SRT 1100 Series Machine for many years. SRT 1100 Machine is good for the c
Electronics Forum | Sat Nov 03 10:57:27 EDT 2012 | davef
EricR: Regarding "*** By the way, since we have used the Tin-Silver-Copper lead free solder there has been a strange liquid type chemical leek from the oven exhausted pipes." ... I don't know anything about your process, but the first thing I'd inve
Electronics Forum | Thu Jan 09 16:42:50 EST 2003 | russ
what are your grading criterias? All of these work pretty good but have differences in the "bells and whistles" I like the Air-Vac DRS24 (no exp. with the 22) because of the large under heater and thermo-couple control. but it is very slow and costl
Electronics Forum | Fri Sep 26 08:15:01 EDT 2003 | Gabriele
Forced gas (hot air or N2 according to solder paste or flux) will be the solution. To rework Ceramic (Aluminum lid Heat Sink)BGA (32 mm square ) or Ceramic Colum Grid Array C-CGA 1,25 and 1,00 mm colum (pitch 42,5mm square), also them capped with a
Electronics Forum | Tue Nov 01 14:46:31 EDT 2011 | davef
Agilent TestJet Technology White Paper In the early 1990s, the testing of digital parts became problematical. Previous in-circuit test techniques sought to ensure a correct, functioning part by applying digital patterns, called vectors, to the input
Electronics Forum | Mon Jun 19 09:47:23 EDT 2017 | georgetruitt
You have a lot to think about! What does the flux manufacturer recommend as far as specifics like water temp or pressure? Do they recommend high temp di-water a detergent or saponifier? Do you currently have a cleaning machine, batch cleaner or inl
Electronics Forum | Tue Feb 06 17:18:25 EST 2007 | GS
Ask Air Vac (US) or Zevac for EU and ASIA. They have now a DRS-24 upgrading Kit for Leed-Free, main change is in the bottom heater. Air Vac- Zevac, made the ONIX series, the follow on of DRS models. Regards.....GS
.gif)
