Electronics Forum | Fri Sep 01 11:55:27 EDT 2023 | tommy_magyar
In my previous job we fitted these connectors with bespoke gripper nozzles (ASM/Siplace) from bespoke trays made for these due to the high volume. It also reduces the risk of damaging the component further in case of a reject. However, at my current
Electronics Forum | Tue Nov 01 16:09:38 EDT 2022 | kamedatec
The machine had the Auto Tray installed but was removed to put here in the company because the machine was bigger than my elevator. The owner told me it was working, which made me waste time testing all possible settings, electronic cards and cables.
Electronics Forum | Mon Jul 17 15:35:09 EDT 2017 | svfeingold
Evtimov, I thank you for your response. I posted a thread about this on EEVBlog but there is less experience there for this type of equipment it would seem. If your interested there's a lot more detail about what I'm after: http://www.eevblog.com/for
Electronics Forum | Fri Jul 21 14:47:53 EDT 2017 | sumote
I commend you for doing your diligence. It sounds like you have a solid plan, and a few decisions to make. I have used Assembleon machines before, a Topaz X and a Emerald X. They seem to be a good compromise between speed and cost. If you are close
Electronics Forum | Mon Sep 04 10:15:41 EDT 2023 | tommy_magyar
As far as I can remember, these always arrived in flexible plastic trays. The trays we designed were made of Durastone. The parts were then transferred at a tape & reel facility from tray to tray every 1000x connectors. If these are high volume for
Electronics Forum | Thu Dec 07 12:29:57 EST 2006 | fastek
It makes sense if you think about it. Siemens was a dead company ready to fold up their tents back in the 80's and early 90's. To their credit they stuck to their platform...got somewhat lucky and the market sort of came to them as the wave of users
Electronics Forum | Mon May 22 11:29:45 EDT 2017 | rbickle
Hey all, We are a small electronics manufacturing company who has been using the solder reflow process for years, but we have been hand placing components. We only run the system 2-3 days per week. I have been looking at buying a used pick and pla
Electronics Forum | Wed May 24 07:27:06 EDT 2017 | stephendo
Hey all, > > We are a small electronics > manufacturing company who has been using the > solder reflow process for years, but we have been > hand placing components. We only run the system > 2-3 days per week. > > I have been looking at > buy
Electronics Forum | Fri Jul 21 12:34:31 EDT 2017 | svfeingold
Hi Sumote, thank you for the advice! I actually visited the K&S service center, they are the company that now handles the Assembleon line. They have service/training techs there who have been around since it was part of Philips and are very familiar
Electronics Forum | Mon May 08 05:23:03 EDT 2023 | akwinney5
Does anyone know the Service Engineer Passwords for the Juki FX-3 and KE3020 pick and place machines? I am trying to set these machines up to be networked and I need full access to the computer on these machines to make the appropriate changes.