Electronics Forum | Thu Nov 26 03:59:59 EST 2020 | ravikumargv
Dear All... Greetings.... Recently My S27HM machine MC had problem and i replaced another same S27HM machine MC and updated BIOS and installed RMOS1&2 after Distribution successfully completed power off the machine and power On the machine, afte
Electronics Forum | Mon Dec 06 17:03:10 EST 2021 | victorzubashev
Hi, Did you check if you can ping between MC and SR?
Electronics Forum | Mon Dec 06 21:57:09 EST 2021 | compit
make an IP address reservation for the MAC address of the machine on the DHCP server
Electronics Forum | Wed Feb 23 22:09:07 EST 2022 | cirsol
Thank you.
Electronics Forum | Thu Jun 29 14:23:37 EDT 2023 | nickadams
I appreciate all the help and will give an update when it's fixed.
Electronics Forum | Wed Jan 07 12:18:37 EST 2004 | teamcanada
Standard boot sequence doesnt support proper power for vision. We boot up without power to camera amplifiers, turn on amplifiers post power up and vision is OK but Emergency Stop with Error Codes 9152 and 9154 pop up during production. Possible flaky
Electronics Forum | Thu Jun 23 13:43:29 EDT 2005 | Stefan
I fear your files are not stored in the default directory or your hard drive is full. Boot with a DOS boot disc and check your C drive for program and fiducial information. Try an older program to check if the program structure and vision informatio
Electronics Forum | Wed Aug 23 22:31:06 EDT 2006 | Derek
I have an ongoing problem with a Panasonic HDP3. When the machine is switched on, the screens flicker for a while and then it eventually starts the boot up sequence, but resets itself. Each time it starts the boot up sequence it gets a bit further. A
Electronics Forum | Wed Feb 21 14:56:09 EST 2007 | chrisgriffin
I just had to replace the hard drive in the SC and the MC. I partitiones the MC drive and installed all operating systems. The machine boots up and gets past "software booting", "conversion of machine data", and then hangs on "initializing machine"
Electronics Forum | Wed Jul 15 20:04:13 EDT 2009 | tonybb
We just bought an used Omron AOI machine and have no prior experience with it. We powered it up and found out that the machine failed to boot-up because there was no internal hard drive (C: drive). Apparently, it has two external hard drives connect
