Electronics Forum | Mon Jul 26 20:40:48 EDT 2021 | stephendo
Software makes a huge difference. Try a different barcode reader app and see if you can find a better one. With data matrix the bar code can be mostly a bunch of blobs as long as the outside is reasonable good. Then the reader only needs a few pixels
Electronics Forum | Tue Jun 13 12:45:22 EDT 2000 | Peter Field
Help!!! We are using Fuji CP6 machines. The nozzles use those gloss yellow (sort of fluorescent) disks to provide contrast between the component and nozzle for centring. My operators keep damaging the disks causing the machines to need recalibratio
Electronics Forum | Mon Jun 14 07:23:42 EDT 1999 | Vinesh Gandhi
We are a medium sized PCB assy. house manufacturing about 2000 motherboards a day. There is a major problem we are facing at the wave soldering stage, i.e. warpage of the PCB. As soon as the PCB touches the wave it warps severely from the centre to
Electronics Forum | Sun Jan 17 03:41:17 EST 1999 | Bill Mooney
I operate at the hobby/educational end of the SMT world. My little book on SM is however listed in many training centre libraries and I thought it may be useful for your readers who are starting out in SMT: The book is: "A Practical Introduction to
Electronics Forum | Sun Jan 17 03:39:28 EST 1999 | Bill Mooney
I operate at the hobby/educational end of the SMT world. My little book on SM is however listed in many training centre libraries and I thought it may be useful for your readers who are starting out in SMT: The book is: "A Practical Introduction to
Electronics Forum | Sun Feb 15 17:12:15 EST 2004 | brian bennett
as george says move beam back towards the centre of the machine make sure it is square although not neccesarily on the alignment arrows. make sure alignment laser is clean along with the recieving mirror on the head.also make sure the driver filters
Electronics Forum | Thu Jan 29 12:42:46 EST 2004 | pjc
Speedline Technologies- Electrovert is one to look at. They have a direct office on Singapore and field engineers in China. Go to this link: http://www.speedlinetech.com/electrovert/aquajet.aspx?OnId=3 Asia: Speedline Technologies 150 Kampong Amp
Electronics Forum | Tue Mar 02 10:19:41 EST 2004 | loz
Hi all, we have recently seen a design that consists off a QFP100, pitch at 25". Also in the centre of this footprint is a FBGA165 footprint, pad size .4mm @ 1mm pitch. We have been informed that we will fit the QFP. I want to remove the BGA pads fr
Electronics Forum | Fri Mar 26 17:12:17 EST 2004 | ben
I have recently encountered a new pcb design with a very high density of components on either side of the pcb. One of the suggested "fixes" is to use the smt pads as vias i.e. the via will be drilled thorough the centre of the smt pad. My concern i
Electronics Forum | Tue Aug 17 10:37:45 EDT 2004 | M.Enright
Some cracks are really obvious,straight down the middle of the capacitor.Some are slight hair line fractures which fail at ICT.In all cases seen,all cracks are through the centre of the cap.My worry is that there may be some which have fractures and