Electronics Forum | Wed Sep 18 20:55:33 EDT 2002 | scottefiske
I'm with you dave...please provide specifics as to defect condition... Are you getting good wetting to both land and lead? Is there any repeatability to lead/location/device? Do you have paste inspection capabilites to verify deposition? Is it a Pala
Electronics Forum | Thu May 22 13:31:52 EDT 2003 | Dave
If you have a component with a height issue and want to lay is down (capacitor in this case), what are the best methods to consider? RTV, epoxy or something else?
Electronics Forum | Thu Jul 15 15:16:26 EDT 2010 | leemeyer
I am looking into pick and place machines that are spec'd to place 01005 components. Does anyone know of a inexpensive make(50 - 75K $ new) that can place these parts. So far all that I have found are 150K and up. Thanks
Electronics Forum | Wed Sep 18 19:43:12 EDT 2002 | dragonslayr
One more variable I've remembered - pad height with respect to solder mask height. Pads being too low can cause stencil "gasketing" problems that in turn allow more paste to be deposited than needed. Are your fabs HASL or some other media?
Electronics Forum | Fri Sep 20 04:47:29 EDT 2002 | byates
If I were you I would contact your solder paste applications engineer and your stencil applications eng. They are there for this very reason and are very capable
Electronics Forum | Fri Jul 06 12:39:01 EDT 2007 | blnorman
What's the metallization on the board? We use an immersion tin board and had to increase our profile to successfully solder.
Electronics Forum | Tue Sep 17 15:03:33 EDT 2002 | ccross
I am working with fine pitch components (15-20 mil) and having soldering problems and would appreciate some opinions. 1) How much of an effect does pad size have on bridging? 2) How much of an effect does solder paste grain size have? What is the re
Electronics Forum | Wed Sep 18 06:53:05 EDT 2002 | CH
1) For solder short, pls check the paste height. Too much vol will cause short. For 15 mils use 5 mils thickness stencil if possible. Check profile preheat time to prevent hot slumpof the paste. 2) type 4 powder will be better for 15 mils pit
Electronics Forum | Wed Sep 18 18:48:33 EDT 2002 | davef
Fabs can produce a solder mask web between 20 pitch leads, but I've never seen a web for 16 pitch leads. Although, I would like know a supplier that can lay-down a fine web. Minimum solder mask web width is about 0.004 thou. An absolute mininum o
Electronics Forum | Fri Jul 06 12:11:34 EDT 2007 | james
We are starting to see issues with using Kester WS R562 with lead free components. The joints look grainy on almost all of the 0402'2 and other small components. Some of the solder does not solder to the terminations. These are hybrid boards which
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835