Electronics Forum | Thu Apr 24 21:52:18 EDT 2008 | fowlerchang
We have measured the temperature of CSP solder joint. The peak temperature is 232oC and the wetting time above 217oC is 30s. But we use leaded solder paste instead of lead free solder paste. I doubt why no crack of solder joint was observed after cr
Electronics Forum | Mon Mar 08 11:54:06 EST 2004 | Wayne Smith
Currently experiencing a problem where the plastic molded bodies of tantalum capacitors are cracking during my SMT processing. Caught after our conformal coating process. I don't know where in the process they cracked. Currently running an exper
Electronics Forum | Thu Jul 03 13:10:39 EDT 2003 | slthomas
I snapped a board in half at a cracked solder joint, and the component pulled free of the solder and still has a very thin layer of metal on the termination end. Based on the construction spec.(solder over nickel over palladium), it looks like it
Electronics Forum | Wed Jan 07 17:34:52 EST 2015 | duchoang
Customer puts our board to thermal test. Test cycle is -55c to 85c, repeat cycle in 15-20min. After 600 cycles, lot of TSOP joints are cracked, leads lifted. There are reasons such as thin PCB, mechanical impacts, warped PCB... My question is, how lo
Electronics Forum | Mon Feb 15 17:57:01 EST 1999 | Earl Moon
| Hope some of you out there can help me with this one. | I am getting feedback from our test department that they are showing opens on solder joints which have visually good wetting. The touch-up operators confirm that the joint looks good. All they
Electronics Forum | Wed Jun 13 16:13:54 EDT 2001 | Igmar
Have anyone seen this problem: Capacitors (100nF 0805) placed on PCB and then appear cracked after reflow. After reflow, the solder joints look visualy acceptable. Then capacitors fail during testing. When attempting to remove capacitor with hot sol
Electronics Forum | Sun Apr 11 11:39:52 EDT 2010 | manchella
When we have sent some of motherboards for reliability testing in a tird party laoratory. It is found that when Dye&Pry is done after 600 cycles of Thermal Cycling, in LGA socket only one of the corner solder joing had 100% type 3 crack. All other so
Electronics Forum | Thu Sep 12 01:49:28 EDT 2002 | ck
Hi all, Any stencil opening recommendation for 20mils pitch mirco BGA. Currently, using 12mils round opening, 5 mils thickness. Seen to have weak joints as it crack after Ict testing. thks
Electronics Forum | Fri Mar 24 12:16:37 EST 2006 | patrickbruneel
Darn Rob you're brilliant You just solved the dilemma of micro cracks and hot tear in lead free, just add a softer metal like.....and the joints won't crack. You wrote "BTW: Lead is far softer & dissolves far more easily than copper or tin, hence wh
Electronics Forum | Tue Dec 15 02:00:32 EST 2015 | padawanlinuxero
We do what here is call a master, this board has a bunch of misalign components, missing components, bad solder joints, crack components, and other defects that we want the AOI to look for, now we compare what the AOI finds with a list of the defects