Electronics Forum | Tue Feb 04 14:03:13 EST 2020 | dekhead
As long as pressure is set properly (may require re-adjustment when adding / removing modules) then have not seen / heard of issues with damage to bottom side components. This assuming that rubber tips are in place and in good shape. I have a custome
Electronics Forum | Tue Sep 07 12:02:30 EDT 1999 | Brad Kendall
| Dear sirs, | | If you have experienced Proflow of DEK screen printer, please let me know the details of it. | | Best regards, | | Jame Bond | | I have had Proflow for about 8 weeks now. I have had my fair share of problems with it. It does
Electronics Forum | Wed Jul 27 09:58:05 EDT 2011 | davef
Pressure printing systems Conventional stencil printing techniques have fundamental limitations as regards paste handling: The volume of paste available for printing is limited, so frequent replenishment is necessary Paste is difficult to c
Electronics Forum | Wed Mar 27 16:54:47 EST 2002 | davef
STARTING RANGES * Pressure � 1 pound/inch of blade (metal); 1.6-3 pound/inch (plastic) * Speed - 0.5 to 3 inch per sec [for standard pitch]; 0.5 to 1 inch per sec [for fine pitch] Your paste supplier�s recommendation is a good place to start. * Sepa
Electronics Forum | Tue Apr 06 10:30:48 EDT 1999 | Scott Davies
Tony Although I agree in principle with Dean that 45 Degrees would be ideal, most of the squeegees I have worked with have been 60 Degrees to the stencil surface. This seems to work best with metal squeegees when printing HASL boards, because the sl
Electronics Forum | Wed Aug 30 08:06:45 EDT 2006 | scombs
The reason I asked earlier about Gridlok is that we are using the on 2 Dek Horizon printers (since Jan 06) with edge clamps and they work well. We run them in Auto mode so they conform to the board at each print so I do not have to worry about the op
Electronics Forum | Wed Jul 23 05:16:43 EDT 2014 | edriansyah
Hi All... Need your advice on the unit of measurement for solder paste pressure. My current company use SP machine from 2 vendor, both are using different unit of measurement. 1. Yamaha uom N 2. DEK uom Kg Up until now I dont know how to do
Electronics Forum | Fri Mar 19 19:05:27 EST 1999 | Earl Moon
Folks, I think we are getting closer to being very happy with DEK stencil printers of the 265 GSX variety. However, problems continue arising concering fine pitch autoflex tooling pin breakage. We are told by the British engineering establishment,
Electronics Forum | Tue Jul 13 14:03:33 EDT 1999 | Earl Moon
| We are looking to automate the paste printing portion of our SMT process. We are looking at used equipment from DEK and MPM from 1994 onward.(DEK 260 & 265 MPM AP20 & AP27) Does anyone have some feedback or concerns with any of these machines? Does
Electronics Forum | Fri Mar 03 10:20:12 EST 2000 | se
Steve, I'd stop worrying about the in-line feature of the printer, I've never really seen an in-line system that wasn't capable of batch operation and there will be very little, if any, cost saving associated with going batch load only. An in-line m