Electronics Forum | Fri Aug 06 13:46:20 EDT 2004 | Marcel
Dhanish, on a CP6 if you have skew problems or missing parts begin by a center check on your smalls nozzles. If all nozzles goods, you will have to check the Z zero of the table, this is the pulse count of the z axis (table height) when the turret is
Electronics Forum | Fri Feb 03 11:13:05 EST 2006 | cyber_wolf
Daxman, The noise you are hearing is a worn out coupling on your large C-axis motor. The pins get loose after a while and they make noise. We had the EXACT same problem. Your station 17 and 19 errors are most likely from dirty windmill sensor dogs
Electronics Forum | Fri Mar 31 10:22:59 EST 2006 | Tech
It could be related but it is kinda hard to tell from just this info. A lot of times if a clutch gets misaligned so bad that the machine has no idea where it is the machine will stop and turn the clutch several times trying to find its home point. It
Electronics Forum | Mon Apr 17 22:52:02 EDT 2006 | daxman
Okay, we got the machine back together about 2 weeks ago, cleaned the clutches and measured the placement accuracy. We are back up 100%, and have not seen any stn 17 & stn 19 nozzle errors. Thanks guys!! 19 of the 20 clutches are really tight; they
Electronics Forum | Mon Sep 06 08:05:51 EDT 1999 | stefano bolleri
| We are using some Fuji machines and have trouble picking parts up from damaged or mis-adjusted feeders. When I was working with Panasonic machines I was able to buy a feeder alignment jig from them to align the pick spot in the feeder, but Fuji doe
Electronics Forum | Mon Sep 06 14:01:08 EDT 1999 | KEVIN SIMPSON
| | We are using some Fuji machines and have trouble picking parts up from damaged or mis-adjusted feeders. When I was working with Panasonic machines I was able to buy a feeder alignment jig from them to align the pick spot in the feeder, but Fuji d
Electronics Forum | Thu Mar 30 12:13:10 EST 2006 | Tech
Obviously you are not as experienced as you think so I will help you out a bit.You are correct on the size of the wrench. I was trying to recall from memory but the wrench size is 8mm. The odd size I recalled came from the other side of the wrench th
Electronics Forum | Tue Sep 07 14:24:20 EDT 1999 | johng
| | We are using some Fuji machines and have trouble picking parts up from damaged or mis-adjusted feeders. When I was working with Panasonic machines I was able to buy a feeder alignment jig from them to align the pick spot in the feeder, but Fuji d
Electronics Forum | Wed Sep 08 16:56:06 EDT 1999 | Md Cox
| | | We are using some Fuji machines and have trouble picking parts up from damaged or mis-adjusted feeders. When I was working with Panasonic machines I was able to buy a feeder alignment jig from them to align the pick spot in the feeder, but Fuji
Electronics Forum | Tue Jul 13 14:19:00 EDT 1999 | JohnW
| | | Hi, | | | | | | I need some urgent informations on stencil design guidelines on how to perform epoxy printing on 0603 and 0402 components. Could anyone help? ( Reflow process is not possible because of some other constriants) | | | | | | Sec
