Electronics Forum | Fri Feb 07 15:16:46 EST 2003 | Claude_Couture
Bulk parts cassettes... another idea that must have looked good at the time. Too bad the manufacturing trend went from low mix / high volume to high mix / low volume. I guess the feeders have to be too complex to feed the part properly to the machine
Electronics Forum | Thu May 26 00:42:19 EDT 2005 | nicholas2005
Ok, I just need someone to give me some feed back on a few questions I have. If anyone could help me that would be great. Example: take a Fuji CP-4 feeder for instance! If I machine my own, place my own parts on it, and place my own company name, and
Electronics Forum | Sun Feb 01 17:28:24 EST 2009 | tpappano
The feeders on the CSM84 actually feed the tapes forward by the force of a spring. On the 8mm and 12mm feeders the spring is loaded directly by the force of the push rod on the placement head. With the larger tapes like 16mm and 24mm, a stronger sp
Electronics Forum | Mon Jan 06 05:53:47 EST 2020 | richardcargill
First switch on after the holidays and this year it's the Dek265 playing up. On switch on, the screen comes up with "motor comms failure, card 0 axis123 " . On looking at the cards there seems to be a power feed missing ( see attached pict
Electronics Forum | Tue Sep 12 03:36:50 EDT 2000 | PeterB
I have just read that Hover-Davis now manufacture a direct die feeder which can feed directly from wafer to P & P machine compatible with a number of different placement machine manufacturers. Perhaps this will help? Best regards
Electronics Forum | Fri Sep 01 18:40:45 EDT 2000 | Daniel Szeto
Does anyone have experience on feeding BGA trays on Fuji IP2. Regards! D Szeto
Electronics Forum | Wed May 24 03:23:30 EDT 2000 | Dane Stokes
I would like to here some opinions from the industry on the DEK 265 models. All feed back positive or negative would be welcome. Main concerns are the Vortex and Proflow options are they worth the cost, or do they just add complications and extensive
Electronics Forum | Fri May 28 20:44:57 EDT 1999 | David Scott
| Scotty, | | What type of glue machine are you using? | | Thanks in advance, | Robert | Robert, We have a Camalot 1818, and a Gemini machine. We use the purge compound in both of them. Scotty
Electronics Forum | Wed Apr 28 13:53:00 EDT 1999 | Tony Arteaga
Anyone using hot air nife for wave soldering process. Does it work? Does it really eliminate solder bridging and does it create any other problems? any feed back will be much appriciated. Thanks Tony A
Electronics Forum | Fri Jun 26 19:02:09 EDT 1998 | Rin Or
I am very interesting of getting information about the criteria inspection of BGA. Example, what are percentage allowance for void, solder joint volume etc.. Any information feed back will be greatly appreciated.My factory just install the Nicolet NX
