Electronics Forum | Mon Dec 13 12:29:12 EST 2004 | fastek
Interesting Rob. The fake ones that I was told about would fail within minutes as the index wheels would be reduced to metal shavings right away.
Electronics Forum | Tue Dec 06 05:40:12 EST 2005 | ajay
we also faced similar problem in fuji cp643. addition to your suggestion - mainly in program PCB thickness, component height checked & set correctly , then problem solved.
Electronics Forum | Wed Oct 15 15:31:55 EDT 2008 | dmoquin
set the vision number to 255 in the PD. This will shut off the vision processing
Electronics Forum | Fri Oct 17 04:23:51 EDT 2008 | fujiphil
Check the image using the fast inching [F] and axis selection [2]. After vision error, press [F] then [2]. The monitor will display a binary images. You will now have a visual look on how the error occurs. Adjust the CCD level of the camera until you
Electronics Forum | Wed Oct 15 15:40:21 EDT 2008 | stepheniii
255 shuts it off, but if I remember correctly 254 still uses vision but passes almost everything? You might want to give 254 a try before resorting to 255. I believe 254 will still correct some pickup offsets. And iirc 255 isn't in the manual but so
Electronics Forum | Fri Oct 17 06:24:44 EDT 2008 | tegel
Hi, When you tried vision type 254, did you change the size of the body? On 254 the body size should be the outer dimension of a component, so on a PLCC (or any other component) the leads should be included in the body size as well. One other thing r
Electronics Forum | Wed Oct 15 15:08:05 EDT 2008 | mbrunton
I have a Fuji IP1 using the MCS control system. Everything works fine, but it seems to have tons of problems placing PLCC4 parts (Osram Power TopLED). Some reels I load up it will give a vision processing error for about 1 out of 10 parts. Other r
Electronics Forum | Tue Dec 14 03:45:31 EST 2004 | rlackey
I don't think that the ones I encountered were "fake", I think that they were cheap copies - ie. actually meant to work, not just to part someone with their cash - engineered to a price (just a very low one!). It does seem a bit strange to go to the
Electronics Forum | Thu Oct 16 12:15:40 EDT 2008 | muarty
Is the nozzle used to pick the offending used to pick other parts in this program? Have had experience where the LED's inside the nozzle backlight have broken down causing Vision Processing errors. And worth making sure that the brushes on the head a
Electronics Forum | Wed Oct 15 17:20:57 EDT 2008 | mbrunton
2, I have to scroll down to the bottom to see the image... and the outline of the legs isn't very clear. The legs are sort of blurred together. I had tried lowering the CCD offset in the part definition to -50, but it still looked bad. Could this
