Electronics Forum | Sat Mar 02 22:33:55 EST 2013 | mdang
Hi Sr Tech, I replaced the AMP and I can home the machine now. The only problem is the AMP display 5 instead of 0 when the power up the machine. I have couple of questions 1) How do you calibrate it to make the AMP display 0 like others? 2) How do y
Electronics Forum | Sat Feb 19 17:10:06 EST 2022 | assuredtech
First off, Fuji machines aren't that simple i.e. changing the CPU could actually make matters worse. There are jumpers, DIP Switches and related data to consider before doing something like swapping cards. Swapping is a shotgun approach but sometimes
Electronics Forum | Tue Aug 09 11:14:28 EDT 2016 | cyber_wolf
•Rated Speed of 40,000 CPH •140 - 8mm Device Locations •14" x 18" Max PCB Size PCB dimensions Max: 457mm x 356mm Min: 80mm x 60mm Board Thickness: 0.3 to 4.0mm Component capacity Up to 140 types (8mm tape) Placing rate 0.09 sec./component - 40,
Electronics Forum | Wed Aug 18 00:41:15 EDT 2004 | Grant
Hi, We have the Soltec Delta C. It works well, and is very stable. I think the software is a bit simplistic, but it keeps the wave stable, so that's the main thing. It's the timer on the software that I find annoying. It has a warm up time, and yo
Electronics Forum | Sun Sep 16 18:57:29 EDT 2018 | spoiltforchoice
Visit the machines, get your quotes. Establish what you need, make sure you understand the running costs of each, the availability of service personnel & parts - see who wins. The answer won't be the same for everyone. Also see which software you lik
Electronics Forum | Mon Dec 23 20:14:24 EST 2002 | vinhmach1
Hi, You can't void of loose parts. But can reduce. You can ask your Lead operator or the the person in charge for that individual line to keep track on the hourly monitor. If they tracking the number of PCB went thru the machine (getting the coun
Electronics Forum | Thu Jun 02 03:45:07 EDT 2005 | grantp
Hi, We just installed some XP Fuji's and they are totally amazing, and place everything perfectly. We have not actually had any misplacements yet in the two weeks running, and they are fast, so I am very happy with them. Going to add a couple more.
Electronics Forum | Wed Oct 15 15:08:05 EDT 2008 | mbrunton
I have a Fuji IP1 using the MCS control system. Everything works fine, but it seems to have tons of problems placing PLCC4 parts (Osram Power TopLED). Some reels I load up it will give a vision processing error for about 1 out of 10 parts. Other r
Electronics Forum | Fri Jun 15 12:37:53 EDT 2007 | ed_faranda
I do want to run a profile, but they won't give up the machine long enough for me to run one. The boards that we are running through the wave are large boards, with large caps, and large transformers on it. We're building highend power amps that
Electronics Forum | Mon Aug 21 10:36:25 EDT 2006 | vikkaraja
I Think I understand your problem. But I think it would be best if you just go in the program and change/check your componet height as needed. It does not take much time. Check your cap height, modify shape data as needed, generate your program and