Electronics Forum | Mon Apr 27 07:37:42 EDT 1998 | Scott Davies
| | I realize this is a SMT forum, but I have another | | problem related to electronics assembly and hope there | | will be someone out there that can save my life (this | | time). | | We build quite a few VME assemblies to which we attach | | a SA
Electronics Forum | Mon Jul 29 15:24:07 EDT 2002 | OhioD
Interesting. From the reaction we got from DEK, I thought we were the only ones with pumpprint woes. We've tried 1 stencil with Bioact SC10, Hydrex SP&WS, Axarel, and Loctite remover on both Heraeus and Loctite glues. Some we spray, some we work-in m
Electronics Forum | Wed Dec 04 17:53:22 EST 2002 | dave edwards
You wanted someone from Loctite to add their opinion on the matter. Our official statement on expired material is that after the expiration date we can not certify the performance and/or quality of the material. Although most likely the material is g
Electronics Forum | Thu Dec 01 00:34:15 EST 2005 | pyramus
Guy's another question, how about any recommendation what type of adhesive to use as underfill for BGA during lead free process? Currently, we are only using Loctite 3609 & 3515 as adhesive we use 3515 as BGA underfill during normal leaded process s
Electronics Forum | Fri Jul 10 06:20:35 EDT 2009 | kpm135
I have a stencil, on which the fids are no longer black enough for my screen printer to find them. A long time ago at a previous place of employment we had a loctite product to fill these in as a permanent solution. I have since forgotten the part nu
Electronics Forum | Tue Jul 05 18:24:50 EDT 2016 | padawanlinuxero
Hi have you try to use some type of adhesive like loctite or a solder mask to avoid lifted components, we use both in 2 different products, we use loctite to avoid a hall inserted in a plastic carrier, lift when being solder in the solder wave, the s
Electronics Forum | Wed Jan 03 05:21:01 EST 2001 | David T Truman
We currently use Multicore solder cream and I have recently been made aware of possible unrest in the Multicore/Loctite camp. Does anyone know what the future holds for Multicore and is it true that they may be pulling out
Electronics Forum | Tue May 15 08:57:37 EDT 2001 | Stefan Witte
John, we were responding almost to the same time and I did not see what you were writing. If the glue dots are not consistent within one syringe, than I would blame it on the pump spindle. Do you have an extra one to put on, or clean the spindle wit
Electronics Forum | Tue May 15 12:56:51 EDT 2001 | Scott B
We had a similar problem a while back and found it to be an operator messing with the air pressure valve (of course no-one admitted to doing it). When cranked up enough, there was enough back pressure in the syringe to increase the volume of material
Electronics Forum | Fri Jun 29 09:58:19 EDT 2001 | edmentzer
We use 30 and 32 gauge PTFE wire. The insulation will not melt with normal hand soldering temps. The wire was made by Thermax/CDT. Their phone number is 800-423-5873. The only problem with the wire is that is hard to glue to the board. We use Ta
