Electronics Forum | Fri Mar 03 10:20:12 EST 2000 | se
Steve, I'd stop worrying about the in-line feature of the printer, I've never really seen an in-line system that wasn't capable of batch operation and there will be very little, if any, cost saving associated with going batch load only. An in-line m
Electronics Forum | Tue May 22 23:49:58 EDT 2001 | jones
I've never tracked the life of a stencil, but if your seeing an decrease in the life of your stencil you may want to look at the printer itself. What kind of printers are you using? I'm more familiar with MPM screen printers and I have seen were cert
Electronics Forum | Wed Apr 07 11:42:16 EDT 1999 | Tony A
| Tony | | Although I agree in principle with Dean that 45 Degrees would be ideal, most of the squeegees I have worked with have been 60 Degrees to the stencil surface. This seems to work best with metal squeegees when printing HASL boards, because
Electronics Forum | Fri May 23 04:25:14 EDT 2008 | muarty
One thing that has to be considered when using rheometric pumps is that the board support should match as that of the pump head being used. You can print 6" boards, but you should really still use board supports upto 16". As mentioned previously if t
Electronics Forum | Mon Jan 25 15:51:02 EST 2016 | aemery
SP1 is a bi-metal spring loaded switch or the "air fault" switch on the main air manifold that detects the presence of an appreciate amount of air being supplied to the machine. Air pressure overcomes the adjustable spring and closes the contacts.
Electronics Forum | Tue Oct 31 03:50:20 EST 2000 | JohnW
Honda, Prnting Glueisn't as difficult as it sounds, as long as you have the right stuff and a good set up. It also depend's on what your going to be placing. If your just doing 0603, 0805 and 1208 than you really only need an 8 thou or 10 thou stenc
Electronics Forum | Fri Mar 19 19:05:27 EST 1999 | Earl Moon
Folks, I think we are getting closer to being very happy with DEK stencil printers of the 265 GSX variety. However, problems continue arising concering fine pitch autoflex tooling pin breakage. We are told by the British engineering establishment,
Electronics Forum | Tue Jan 12 14:59:14 EST 1999 | Earl Moon
| What would be a good metric for process control of a stencil printer? (fully automatic, vision equipped, stendil printer). | I'm doing some more DEK 265 GSX's with everything imaginable hung on them. Have done Lt's and the MPM2000. This makes mach
Electronics Forum | Wed Aug 02 15:19:29 EDT 2006 | SWAG
Sounds like air pressure is set O.K. The next thing to check is that the platen surface that the x and y axis ride on is perfectly clean. After that, you should knock the camera off the platen and make sure that all of the small air nozzles are blo
Electronics Forum | Wed Apr 21 18:58:44 EDT 1999 | Earl Moon
| Technically speaking, there is nothing for me to say. Oh maybe just one thing - to get me back into the fray: Steve, I must say I totally disagree with your assessment of under screen cleaners. I have had nothing but excellent results using the dr