Electronics Forum | Tue Nov 02 07:50:18 EDT 2010 | babe7362000
I just need a clarification on NC254 No clean solder paste. If we have parts on the bottom side of the board that already are soldered and we go to run the other side of the board and it was misprinted, is it ok to run thru the washer? I just need
Electronics Forum | Thu Sep 26 14:43:43 EDT 2002 | Jim M.
unsure of what solder spec. your working to?.IPC/EIA J-STD-001C, Section 9.2.4 clearly states dull, matte, gray or grainy appearing solders are accpetable depending on your process and if the acceptability of the neaxt paragraph is met.IPC 610 and J-
Electronics Forum | Wed Oct 02 15:20:55 EDT 2002 | Eric
Is there a steadfast rule of thumb for a good solder joint on an Enig Gold board. I come across this number 217C when discussing BGA profiles. Is this a published number? I sure could use a reference. Anybody feedback is appreciated.
Electronics Forum | Tue Nov 02 08:36:51 EDT 2010 | rgduval
Michelle, Our experience with no-clean solder pastes has been that water washing a mis-print is a bad idea. We've found that DI water does not do a sufficient job removing the no-clean paste (the same goes for stencils). Instead, we have washed no
Electronics Forum | Wed Mar 24 10:43:59 EST 1999 | Tim
Hi, I have a customer who's electronic assemblies produce RF. He is insisting upon aqueuos cleaning. We switched to a no clean solder years ago and no longer have an aqueous system. Is aqueous cleaning necessary to eliminate 'cross talk' of the s
Electronics Forum | Wed Aug 30 09:56:37 EDT 2000 | NLykus
Hi Ramon, We have had this problem before on our Seho Wave Solder Machine. We are currently using a spray fluxer as well. By imersing the PCB into the flux you stated you are getting good results. What you need to do is check your spray patter
Electronics Forum | Tue Jan 30 07:29:21 EST 2018 | charliedci
I believe the correct statement (I've been told) is "the process is no clean". The solder paste is "low residue". As a CM, in the past we had customers that insisted on a wash after soldering. We used DI water with a saponifier which had mixed result
Electronics Forum | Wed Jan 31 07:37:48 EST 2018 | stephendo
Michael What you say is not a reason for washing. It is a reason to not use Can't Clean solder paste. Although I guess if they use the real name they wouldn't sell as much as they do by calling it No Clean.
Electronics Forum | Fri Jan 26 12:19:24 EST 2018 | clockwatcher
I'm looking for a No Clean SAC 305 Solder Paste that can be run through our inline wash. No chemicals just DI water.
Electronics Forum | Thu Feb 01 08:46:54 EST 2018 | charliedci
Your right, he is "selling it". Or I should say he is not selling no-clean solder paste.
