Electronics Forum | Sun Mar 12 11:10:51 EDT 2023 | compit
I don't know how in Panasonic - in Yamaha and similar pressure / vacuum is calibrated for each head and nozzle - maybe you need to calibrate?
Electronics Forum | Wed Mar 20 15:01:37 EDT 2024 | linux
Reboot usually does the trick, Reason for these fault, (1) Nozzle holder, the grippers are holding the nozzle too tight, stretch the spring slightly, (2) shaft is sticking, removed the head lubricate the shaft.(3) Nest not opening and closed within t
Electronics Forum | Fri Mar 22 14:26:18 EDT 2024 | carl_p
When picking nozzles, when dropping off nozzles, when placing etc etc?
Electronics Forum | Mon Jun 29 15:36:10 EDT 1998 | Steve Gregory
| Is there any vendor of Nozzle in Aftermarket, so tell me... | tks... Sandro, Yes there is. There is a company in Texas called: WP Sales Inc. 2317-D Roosevelt Drive Arlington, Texas 76016 Phone (817) 459-0181 FAX (817) 459-0182 WEB Page: www.
Electronics Forum | Fri May 04 02:32:10 EDT 2007 | jmelson
Thanks! Well, the procedure in the book says to first calibrate the mech aligner with the beam sensor, but that exceeds the X travel. I guess you can just eyeball it off the nozzles and then use trial and error. While poking around on the machine
Electronics Forum | Wed May 03 13:56:59 EDT 2000 | Ioan
Greg, sorry for not being able to help with the programming issue, but there's something wrong with the situation you're in. You shouldn't accept answers like "no book, no program". Panasonic must have a strong customer support. Just call them, they
Electronics Forum | Wed Oct 08 10:54:35 EDT 2008 | stepheniii
Check with your stencil house. At one time I used a Panasonic screen printer with the fiducial camera looking at the top of the stencil. The stencils are cut from the bottom so the fiducials had to be cut all the way through. And the stenicl house wo
Electronics Forum | Fri May 13 22:16:16 EDT 2022 | alex22
Indeed, stickiness of LED dome varies from batch to batch. We didn't have much success with adjusting pick&mount settings. Also, usage of other nozzle (recommendation from SMT manufacturer) didn't help. Usually, we have a good experience with similar
Electronics Forum | Sun Apr 17 00:04:03 EDT 2022 | klauss
I am mounting 3535 Cree High-power leds with p&p machine. First nozzle picks up the led normally and then it's placed good but after 4-5 times nozzle picks up the led like at an angle. looks like it holds the led from the side edge of the dome.
Electronics Forum | Tue Aug 02 18:38:14 EDT 2022 | klauss
when i use only one nozzle to mounting 3535 cree power leds, it works good but when i use 2 or more nozzles, leds are getting rotated or upturned just after the nozzle relaese the led. it's like nozzle throws the led not mounts. But not all the led