Electronics Forum | Thu Feb 17 17:33:34 EST 2022 | mnorthey
Hi all, I have a Dek 265 Horizon that fails to print at the correct pressure. It fails pressure every pass. I am trying to Calibrate it with a PFR1200N pressure Tester which we use for our DEK 248 Printers. I am trying to build up the table height
Electronics Forum | Thu Jun 24 15:44:12 EDT 1999 | Earl Moon
| | Dear guys, | | | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are no
Electronics Forum | Mon Mar 03 09:16:09 EST 2003 | msivigny
Hello martys, The critical variables to measure print process capability on any printer are its ability to securely clamp a board, accurately align the board to its mating stencil, print with appropriate squeegee pressure and follow print material gu
Electronics Forum | Fri Jul 30 19:27:40 EDT 2010 | dman97
Hi All, Does anyone know how to repair a UP2000 that has the front squeegee lower than the rear? Can this be fixed by playing with the drive belts? The front squeegee is sitting lower than the rear and thus gives an uneven print stroke. The front s
Electronics Forum | Wed Apr 10 13:20:36 EDT 2002 | barryg
I am curious how you measure your printed paste thickness. We are considering doing the same. As it is now we assure we have squeegee pressure and speed controlled, have not actually measure the printed paste thickness.
Electronics Forum | Mon Sep 17 15:27:51 EDT 2001 | jschake
Challenges: The basic defects that impact assembly yield are bridging, satellite solder balls, and opens (i.e. tombstones / draw bridges). There are many variables with the stencil printing process that can impact these; several of them are listed
Electronics Forum | Thu Jun 24 13:12:15 EDT 1999 | MD Cox
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin
Electronics Forum | Thu Jun 24 15:58:46 EDT 1999 | Adam Pratt
| | Dear guys, | | | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are no
Electronics Forum | Thu Jun 24 18:24:13 EDT 1999 | Christian N.
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin
Electronics Forum | Thu Jul 01 13:57:57 EDT 1999 | Kris Wiederhold
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin