Electronics Forum | Tue Dec 19 15:55:28 EST 2017 | emeto
Please, don't go this route. It will be not the machine that you expect. If it is Chinese good machine, you should be able to find distributor close by, if it is a clone of a well known machine, they will have problems selling it to you. Man Corp and
Electronics Forum | Tue Sep 26 11:58:56 EDT 2006 | lheiss
Thanks for the responses everyone. It seems that the main problem was that the extent data wasn't set up right in Central Controller. I deleted it from the Pickup and Place files and it started placing things without correction. I only had about 1
Electronics Forum | Fri Jul 16 09:03:40 EDT 2004 | russ
A couple of thoughts, 1. buy larger quantity reels and load more trays of the same P/N if your problem is replenishing the machine. 2. If you're talking about changeover I would suggest that the feeders be set up in the kitting process and deliverd
Electronics Forum | Mon Oct 02 16:38:20 EDT 2006 | lheiss
Brad, Thanks for the info. Now that I have my align data set correctly I'm having this problem. I've greased and realigned until I'm blue in the face. If I do a nozzle change then a function 30, press the nozzle on with my finger and do a functio
Electronics Forum | Sat Jul 17 15:22:17 EDT 2004 | rohman23
Thanks for all the responses. I do agree with what was said, and can certainly see reasons not to try. I'll write a little more about what we do. We are a defense contractor, and as I mentioned very high mix, low volume. We only have 1 SMT line.
Electronics Forum | Mon Oct 09 13:36:30 EDT 2006 | ppminc
Phil, The QSA-30 was built by Sam Sung, Sold by Quad. Single Head 2 Nozzles around 11K CPH Quad does not support the machine but I believe you can get parts direct from Sam Sung. I am not sure if they have a registration fee. The QSA used Quad made
Electronics Forum | Sat Jan 22 16:39:26 EST 2011 | eadthem
Your typical high mix line would consist of, Stencil printer, 1-2 foot conveyor belt, fast PNP machine (say a universal 30 spindle turret lightning head), 1-2 foot conveyor belt, large/heavy part PNP (say a universal flex jet 7 spindle or 4 Spindle),
Electronics Forum | Thu Nov 11 09:52:39 EST 2004 | cyber_wolf
By the way.... The placing error is in either the X or the Y. There is no theta skew.
Electronics Forum | Mon Jan 28 03:00:24 EST 2019 | nikevoo1
The problem was in mechanical valve O-rings. I replaced the valves and the problem disappeared.
Electronics Forum | Mon Nov 29 18:06:20 EST 2004 | mike
Verify your offstes in the proper by ruuning PAM on the machine.
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774
.gif)
