Electronics Forum | Fri Jan 19 12:17:57 EST 2001 | slthomas
Thanks Dave. Talked to a few people at APEX this week and if nothing else, had my frustration reduced some. Of course I made sure I talked to mfg. people and avoided the design guys like the plague. ;) I actually picked up a copy of 785 a while bac
Electronics Forum | Wed Mar 14 18:17:40 EST 2001 | mparker
Some thing to watch out for is the cure spec for the adhesive. Will that match with your solder paste reflow spec? You will have two dissimiliar materials going through endothermic reactions at the same time. You could end up with under cured adhesiv
Electronics Forum | Tue Jun 02 16:02:13 EDT 1998 | Earl Moon
| First of all let me say that we are currently placing other 240 pin QFP'S with no problem. But none of them have the MASS of this beast. | The part is a XILINX XC5215-6HQ240C which has a large metal heat sink covering most of the bottom of the part
Electronics Forum | Thu May 21 22:25:39 EDT 1998 | Mike Konrad
Your experience is typical. The degradation curve of resins resembles the track of a Six-Flags roller coaster. Water quality remains high (10 MW+) for 80% of the resin's life. For a very short time, quality will drop to 7 - 8 MW, then, without noti
Electronics Forum | Tue Apr 16 13:59:33 EDT 2002 | paulausten
They work great as long as your conveyor speed > has been calibrated and checked on some type of > PM schedule. On some oven types these sensors can > warn you to possible problems with the conveyor > speed. Say the oven is calculating that the b
Electronics Forum | Sun Mar 06 17:10:41 EST 2005 | Darby
The manual gives you a fair idea here. Reference for the Yamaha manual is THE6006 - I don't know if Philips is the same. Cause is either overload or overcurrent. The manual suggests that you can tweak the trimmers on the driver board but these are us
Electronics Forum | Wed Aug 31 10:26:24 EDT 2005 | Carmichael
I respectfully disagree with vapor phase or reflow oven being the technology of choice here. Have you considered straight conduction heating? (ie: hot plate) If you have a lot of these to do you can purchase in-line conduction ovens like the Sikama o
Electronics Forum | Wed Sep 13 10:31:14 EDT 2006 | CL
Hello Brad, We are running the Slim Kic 2000. We have found the predictions to be fairly accurate as long as the suggested change is within 20 degrees of the original recipie. As a test I ran a board with the wrong profile. The predictions got me wi
Electronics Forum | Tue Dec 03 18:51:57 EST 2019 | kylehunter
Hi all, We are having a confusing defect with one of our client's boards. It is a large board, 30" x 12". The client supplies the LEDs, they are cheap overseas diodes, and it is not uncommon to have reels with the packaging torn. We have w
Electronics Forum | Thu Aug 31 18:48:25 EDT 2023 | SMTA-64387600
I presume you have a local flux spray with your selective solder machine (I have no idea what you use). If I have a group of leads in close proximity like this, I would be trying to design a well and nozzle setup that I can use to solder all the joi
.gif)
