Electronics Forum | Sun Feb 01 17:28:24 EST 2009 | tpappano
The feeders on the CSM84 actually feed the tapes forward by the force of a spring. On the 8mm and 12mm feeders the spring is loaded directly by the force of the push rod on the placement head. With the larger tapes like 16mm and 24mm, a stronger sp
Electronics Forum | Tue Aug 14 08:06:38 EDT 2012 | milan89
Hello, I am having a problem with Universal GSM1 with the Adhesive head. It's a model with piston pump. When i try to dispens a sping that needs to push the adhesive in the syringe doesn't have power to push it. Everything is well cleaned. Maybe it'
Electronics Forum | Mon Jul 29 13:34:28 EDT 2013 | dontfeedphils
Usually the reason it will fail a part like that when you are using mechanical centering is because the part is usually picked so off center because of the body shape. So when the centering jaws close to push the part to center they give up and fail
Electronics Forum | Sat Sep 28 15:58:38 EDT 2013 | sonavc
Hi. 'm new to this Fuji CP3, I bought this machine in working condition ( I saw it ran, but I forgot to check the board in and out ).... Moved to my location, Problem: When the board is trying to load to the X-Y table, it passed the conveyor B but
Electronics Forum | Wed Dec 13 02:58:03 EST 2017 | robl
You could use a bowl and track vib feeder to present them, but picking them up and pushing them far enough into the PCB is going to be tricky as they look almost flush mount. Also you need to consider the reliability of the post plated hole diameter
Electronics Forum | Tue Jan 04 17:08:34 EST 2022 | tey422
I used to work with boards with similar parts like it. There are two key things to do to reflow it. 1st is to have extra solder, which by adding solder beads using pick & place machine to place on top of the solder paste. 2nd is to have the using th
Electronics Forum | Tue Feb 01 19:02:48 EST 2022 | proceng1
USC PArk is your underside stencil cleaner. The camera pushes it back and a magnet grabs it and holds it back. Ours did this many years ago. I pulled the rear cover and initialized the machine, when the camera pushes the stencil back, grab it and
Electronics Forum | Wed Apr 20 18:06:37 EDT 2022 | kumarb
For future readers - just needed a little bit of lube. Many thanks to Michal & the staff @ Trans-Tec (USA) for their excellent support, as always. Please see attached. For our (dated) machine, the black dial would turn only after hitting the gym
Electronics Forum | Mon Feb 06 18:45:26 EST 2023 | nitroone
Hi guys, So i am trying to find out what type of air quality sensor you use in your facility if any? What other sensors are required to be installed to ensure that air quality is safe for workers? We have both an inline oven, and a selective solde
Electronics Forum | Tue Oct 17 09:26:55 EDT 2023 | georgegr777
Thank you , I checked the green button. When I pushed it I can heare the relay noise and the LED between green and red button is on. But when I push the READY switch it is not responding. As for the email the gmail server send me back information th