Electronics Forum | Wed May 11 15:04:16 EDT 2011 | thejedeye
LED sticking in nozzles are such a problem, seem everyone has issues with this from time to time. Don't want to advertise who's nozzles worked best but will answer you back if you drop me an email.
Electronics Forum | Thu Apr 05 13:52:07 EDT 2012 | christian01976
Hello! Did you try to pick all parts with the same type of nozzle? The LEDs are not so big that you have to use a nozzle 74. Christian
Electronics Forum | Thu Apr 12 02:23:52 EDT 2018 | spectrumsmt
Juki is well supported in the US Stephen. When you get sorted out then come to us for custom nozzles for LEDs. That is what we do! Also OEM feeders and nozzles.We are based in the UK and also Phoneix AZ Good Luck in your ew venture IAn
Electronics Forum | Wed Aug 03 07:05:46 EDT 2022 | klauss
I got special nozzles, too. but i think i recognize them wrong into the program. Do you please tell me what's the recommended vacuum break time, placement condition keeping time and placement speed
Electronics Forum | Mon May 02 18:07:32 EDT 2005 | Moe
Has anyone developed a custom nozzle for these guys? http://www.osram.convergy.de/upload/documents/2005/03/03/14/47/LA_LO_LS_LY_E63B.pdf I've found that there is a deposit of epoxy at the base of the lens that can sometimes cause the LED to lodge in
Electronics Forum | Thu Apr 05 16:28:35 EDT 2012 | acsscott
I have told the Topaz that it has 73 nozzles installed, and selected to use 73 nozzles for the LED's. THe 74 nozzles are actually on the machine. I think it has something to do with the part dimensions in the vision section. The part is 5mm x 6mm
Electronics Forum | Tue Oct 21 05:28:37 EDT 2014 | rob
Hi Emanuel, Chingyi do quite a wide selection of rubber tipped nozzles http://www.chingyi.com.sg/solutions_smt.php If you are in Europe, then Wilfred @ Europe-SMT knows these machines better than most: http://www.europe-smt.com/ Our personal favo
Electronics Forum | Fri Nov 05 11:30:53 EDT 2010 | deanm
We have a Quad QSV-1 pick and place machine that has performed fine for us with the exception of cylindrical glass (MELF) type diodes. The machine often fails to pick these out of the tape to the point where it is easier to hand place them. As far
Electronics Forum | Mon Jan 27 10:06:03 EST 2003 | binns
Just to set the record straight... Samsung did not build all Quad machines. QSA = Quad Samsung America, The QSA-30 machine platforms were manufactured by Samsung, utilizing Quad feeders, other Quad technology and Quad sales and service. Before the
Electronics Forum | Mon May 16 17:47:53 EDT 2022 | proceng1
Also, be sure that the board support is good. If you have any area of the board with less support, and it bounces a little when placing the LED, it may seem like it's randomly not placing correctly, and so any Z-depth or blow-off tweaking you do wil
