Electronics Forum | Mon Feb 20 15:24:50 EST 2006 | davef
cmiller The materials suppliers mentioned above (eg, Dymax, Loctite, Permabond) have applications types that will recommend products to meet your requirements.
Electronics Forum | Tue Dec 19 03:37:12 EST 2006 | aj
Not quite sure what your problem is by your explanation but if you are seeing component shifting with no real trend , I would be confident that it will be down to the Clamping of the board. Make sure the adjustable rail is secure and not moving sligh
Electronics Forum | Wed May 07 19:39:13 EDT 2008 | raincity1
I have purchased Asys conveyors for the last 3 lines I have installed, and have been very happy w/them; they are a little pricey but extremely well designed. And we also use the RTV trick for securing the conveyor feet - very effective. ts
Electronics Forum | Fri Sep 19 16:34:21 EDT 2008 | jtownsend
I have asked for references but have not received any. Have been told because of security issues I would not be able to do a site visit to the one closest me.
Electronics Forum | Mon Oct 26 06:57:49 EDT 2009 | lococost
That's the thing, IPC states you can leave solderballs on if they are stuck on securely... We are never sure they are, so we remove all solderballs.
Electronics Forum | Mon Jul 27 20:35:13 EDT 2009 | michaellaw
This is the common problem for RH6 m/c.You need to check of the following: 1)Make sure the spiral corl is secure properly especially near to detection amplifier box 2)you may try to fine tuning the sensibility VR on the detection card. 3)change the t
Electronics Forum | Thu Sep 10 11:47:44 EDT 2009 | mikesewell
The adhesive should be a dielectric (insulator) by design, if not it could possibly short across leads of the very parts it's intended to secure. It normally isn't a concern - what is the surface resistance of your soldermask, bodies of ICs, ...etc.
Electronics Forum | Tue Aug 23 06:59:26 EDT 2011 | headlad
We use a 2 part epoxy from DEVCON it's listed as 5 minute FR 2 part epoxy. We have used a lot of the material with excellent results, specifically for security reasons.
Electronics Forum | Thu Jun 28 22:20:23 EDT 2012 | davef
John: Secure the capacitors that you removed from the machine ... * Removed capacitors have a problem * New replacement capacitors don't have a problem Find help to determine the difference between the two reels of parts
Electronics Forum | Mon Jun 03 22:47:10 EDT 2013 | navworx
Thanks MPMENG. Our software is 8.3.3. Has anyone converted to XP (from NT)? What obstacles exist to do this? We'd like the printer on our internal network, where security patches can be applied to the OS.
