Electronics Forum | Thu Jul 09 08:03:48 EDT 1998 | smd
OK, I'll take a little abuse as long as you guys are giving me all this great advice. I am concerned about what might happen when a drop here and there comes from the connectors and is absorbed into the box. The box is going to suffer from this. I am
Electronics Forum | Thu Jul 09 08:04:11 EDT 1998 | smd
OK, I'll take a little abuse as long as you guys are giving me all this great advice. I am concerned about what might happen when a drop here and there comes from the connectors and is absorbed into the box. The box is going to suffer from this. I am
Electronics Forum | Wed Aug 22 14:57:47 EDT 2001 | mparker
Lookit here, Mugwump, The SMT community at large is composed of a vast array of expeiences, some barely with SMT 101 behind them to others who have probably already forgotten more than you'll ever learn. Without direct, personal contact of any
Electronics Forum | Sat Jan 20 17:41:11 EST 2007 | bvdb
Hoping someone can help us. Our Fuji IP-1 won't boot up unless we disconnect the 25 pin RS232 connector that runs to the MCS16/F programming computer. It doesn't matter if the 9 pin connector on the other end of the cable is plugged into the MCS16/
Electronics Forum | Mon Oct 22 09:50:54 EDT 2007 | cyber_wolf
The true way to track feeder maintenance is through a real time bar code reading system...For example Bartector. (We have never used this system nor do we receive any benefit from them) We currently have our CP6 feeders set up on a three month inter
Electronics Forum | Tue Aug 16 19:03:26 EDT 2011 | rsikora
Hi, I have a faulty intermec printer CPU > board. > > I'm probably in the wrong place but if > anyone can give me some help, I would really > appreciate it. > > I manage to connect an > incorrect thermal printhead to the printer and I > think
Electronics Forum | Sat May 05 00:44:55 EDT 2012 | isd_jwendell
I currently use an Essemtec CSM7100V (I've used it for about 5 years), which will place 0.5mm pitch and 0402s. I bought this after selling a Manncorp machine (used it for about 3 years). Service from Essemtec (manufacturer) is MUCH different than Man
Electronics Forum | Tue Aug 13 10:09:10 EDT 2013 | dyoungquist
We have a Heller 1707EXL that we use for lead and lead-free production. It has both a mesh belt and edge rails. We run 90% of our assemblies on the mesh belt (leaving the edge rails wide open). I have noticed when profiling a board on the mesh bel
Electronics Forum | Wed Sep 16 18:06:14 EDT 2015 | pmcg
Problem with cleaning these machines is once you start it's easy to get carried away. ;) We cleaned our SPA-400F a few months ago, had been offline for a while as we were using our SPA-250. It started as just a clean and to replace all the flux pip
Electronics Forum | Mon Oct 12 03:09:06 EDT 2015 | akon63
Problem with cleaning these machines is once you > start it's easy to get carried away. ;) > > We > cleaned our SPA-400F a few months ago, had been > offline for a while as we were using our > SPA-250. > > It started as just a clean and to > r
.gif)
