Electronics Forum | Thu Sep 04 21:50:47 EDT 2003 | davef
We like to use "enameled wire" that can be stripped by hot solder. Formvar [105�C] will not do that. Formvar was designed to with stand the hot oil seen in transformers. So, it requires either chemical or mechanical stripping. Most polyurethanes
Electronics Forum | Fri Jun 17 10:47:48 EDT 2005 | davef
Doug: We agree that imm tin can be easily stripped and reapplied. Do you order imm tin as bright/ dull? Is bright/dull a function of who the fabricator lisences the process? Er wha? Electroplate tin can be either matt or bright. It is different
Electronics Forum | Wed Jul 05 16:01:53 EDT 2006 | Chunks
I agree with Grant. The MYDATA machines we had were very easy to program, adjust and as Grant states make them pick up from just about anything. The best part of them was using partial reels or strips of parts. These machine don't care about havin
Electronics Forum | Fri Sep 15 12:05:07 EDT 2006 | Steve
SWAG/Russ, How do you guys handle the left overs that the surface mount operators are left with at the end of the job? Do they discard the excess material or return it to stock? We are a small CM and have runs similar to SWAG. 50-100pc, high mix. We
Electronics Forum | Fri May 04 12:19:53 EDT 2012 | gnus
I'm guessing you're running small batches of boards on the MyDatas. We had the same issue with management when they decided to save on parts (not realizing it cost them more in time and more frustration for us). We had Agilis feeders so that helped.
Electronics Forum | Thu Jun 26 06:14:16 EDT 2014 | allgood
We find sticking tape down to the tray wagon or to a base plate is Ok but not very repeatable - when you peel the empty off and stiock a new on e down you have to relocate it every time so some way of holding the strip in a repeatable way is better.
Electronics Forum | Wed Nov 21 06:01:57 EST 2018 | premkumar_haribabu
Hi Davef, Thanks for your quick reply , just my inputs - we using 99.99 % pure nickel strip for soldeirng & when we do manual soldering this nickle stips its working well but when coming to SMT reflow even after high peak temperature ,its removes ev
Electronics Forum | Sat Jul 08 02:10:31 EDT 2023 | unsung
Wipe down and clean the 2 Gold strips on Y Axis and the encoder ( located on both sides of the machines covers must be removed ) Probably has dirt happen to someone who had an old universal 2007 that was sitting outside in the open air for a few day
Electronics Forum | Wed Sep 20 16:01:05 EDT 2000 | jackofalltrades
We get solutions from Circuit Repair Corp. PS-054 Solder Strip PS-044 Electroclean PS-034 Nickel PS-024 Gold
Electronics Forum | Sun Dec 19 10:02:55 EST 1999 | ron chua
Hi, how to ensure flexible boards do not warp after reflow and still remain flat for subsequent operations. What is the best way to hold and transport these strips from one process to another. Thanks!