Electronics Forum | Tue Oct 13 01:39:37 EDT 2009 | jjmag921612000
If you are using a current board program, and then modifying to your new board. It is possible to have the wrong PCB dimension data in for your new PCB. You should review all of you basic information about the pcb, and then go into the fiducial teac
Electronics Forum | Wed Nov 11 13:14:10 EST 2009 | vinh
Hi, GC-PLACE VERSION 4.1.2 Please, help me. Can you teach me basic steps to get xy data for machine. I usually teaching each location then write down xy. But sometime the board is a lot of component and take me a day to finish. Thanks
Electronics Forum | Wed Dec 30 15:05:18 EST 2009 | bobpan
Craig: Make sure you have done a table changeover and then when you go into teach tabletop there should be a tab at the top that says matrix trays. After selecting that ...choose the tray you want below and then right click on a part on the tray in t
Electronics Forum | Wed Mar 31 10:08:13 EDT 2010 | leemeyer
First I would only be concerned about the front panel led's if the transport is not clamping. These LED's are most likeley burnt out. If the transport clamps your sensors are working properly. If you are seeing a "Place 1 Z" on the handheld it is ask
Electronics Forum | Fri Nov 18 14:04:46 EST 2011 | bobpan
Seems to be quad c-series week......anyways.... 1. What version ap and central controller? 2. What version of windows? 3. What size are your vision models? 4. What options are selected in teach fiducials......globabl fiducial correction,multi fiduci
Electronics Forum | Sat Nov 08 21:48:42 EST 2014 | sonavc
ETC then you see TEACH. But I can't see it. Do my machine need to update the software or chane some thing in the Proper program?. I'm using MCS16 computer. So far the machine runs great , But take me awhile to move to correct fiducial location Thank
Electronics Forum | Tue Apr 04 10:39:12 EDT 2017 | prdmm1
we have a My9 using 2.4.6B software. the auto teach for new components option is there when creating a new package. but when i select it, it wont work. does this mean i need a software upgrade or does this mean the auto teach was disabled? when i hit
Electronics Forum | Thu Apr 26 13:16:28 EDT 2018 | bobpan
I am trying to figure out how to teach the position of the tooling so that its aligned to the hole in the worknest. In other words...the carousel is out of position. When i go into machine calibration and i step through it the process freezes at a st
Electronics Forum | Sun Dec 31 17:16:37 EST 2023 | ravikumargv
Dear all, We are facing Siemens F5HM machine zero point calibration issue, due to fiducial issue and we need to teach the fiducial position and it's not possible, kindly help us how to teach the zero point fiducial for calibration
Electronics Forum | Wed Nov 09 05:44:06 EST 2005 | grantp
Hi, It sounds like your vision is not setup right for this component, and it's rejecting some of them because they would be failing the test. This brings up a point we discovered. Don't use auto teach for the component if your using HYDRA or vision