Electronics Forum | Sat Jul 16 17:29:50 EDT 2016 | aemery
Yes, you need to run the 'offsets' calibration to correct the offset issue. If the machine is in good working order and all of the other alignments and cal's are completed then you are good shape to go to run this cal. If not, you could waste a few
Electronics Forum | Thu Aug 13 19:54:01 EDT 2015 | aemery
The camera assembly is designated as X23; the stencil & board lighting as well as the camera video signal pass through the DB9 connector at the camera. There is a ribbon cable in the vision gantry tray that carries both to the box on the left side o
Electronics Forum | Tue Dec 05 13:34:51 EST 2000 | NickMata
Hello all, at the present I have some product onto which I glue backside components. I dispense a pattern of "witness" to use as a visual cue as to the quality of the dispensed glue dots. A problem which I have encountered is that operators will oft
Electronics Forum | Thu Feb 15 13:46:16 EST 2018 | aemery
Griinder, Maybe it's me, but I think what you might be saying here is that you see a reflected image of the PCB or Stencil when you and teaching the fiducials and it is interfering with the teaching routine, is that correct? If this is true it is c
Electronics Forum | Fri Nov 25 11:55:22 EST 2022 | poly
So I'm attempting to run feeder teach for my platform tray feeder... but I've got no idea what first point I should teach is... normal is the end pin of the feeder but this is for the ptf conveyor... so I've got no idea. If I just teach each corner
Electronics Forum | Fri Oct 20 14:06:49 EDT 2006 | russ
Gotcha Steve, so then in essence if you teach the skew, then the Machine "straightens" it out then right? Russ
Electronics Forum | Thu Oct 19 14:37:30 EDT 2006 | curious
OOps, to quick on the draw. If you have the CAD data for you fids I'll bet if you input those numbers (not teach on the machine) they'll work. Do you teach your globals the same way?
Electronics Forum | Mon Sep 21 04:23:16 EDT 2009 | smtbox
R series Features FCS (Flex Calibration System) highly regarded easy maintenance just got even easier! The optional FCS calibration jig is a simple to use system to re-calibrate placement accuracy. The machine automatically picks and places jig comp
Electronics Forum | Mon Feb 12 09:44:47 EST 2007 | SWAG
Enhanced board set-up, set conveyor width, load board, (your fiducials must be accurate!), use two fiducials to set reference point, click on placement(s), move crosshair to centerpoint, use two point teach to teach one point in the center or use cor
Electronics Forum | Wed Jun 02 11:33:00 EDT 2004 | Vinnie
I think you are right. Board stop on Y. Vision square is the stencil fiducials. So if you are using pads.... I am not sure. But why didnt you used board fiducials? none on the board?
