Electronics Forum | Wed Jun 05 12:42:37 EDT 2002 | tombr
Hello Everyone! Does anyone know where I can find a spec on the number of wires that can be crimped in a terminal? Would like IPC SPec # Thanks! Tom
Electronics Forum | Tue Nov 19 09:50:58 EST 2002 | GSW
Hi, Need to know if anybody has good reliability data on Sn/Bi component termination and Sn/Pb solder paste ? thanks GSW
Electronics Forum | Fri Jul 04 09:01:49 EDT 2003 | davef
You should see a coarse silverish / grayish coat on the termination that indicates that it soldered. We have to opinion [don't know] about the strength of solder connection versus the strength of component terminations.
Electronics Forum | Tue Jun 15 11:08:02 EDT 2004 | russ
Well take away the easy answers! How are the parts falling off? Is the joint breaking the termination on the part or is it breaking at the solder to termination interface? Also, how long are these parts in liquidous state? and what type of paste a
Electronics Forum | Thu Feb 17 04:09:19 EST 2005 | greg
The solder adheres to the lands very well so i don't think that problem is with solderability of the PCB. Not wetting to the 0805 terminations. When the problem appeared with the 0805 we chenged the supplier. But there was commnon element Pb-free te
Electronics Forum | Thu Feb 17 08:14:57 EST 2005 | davef
The issue may not be the solderability protection. It could be that the metalization on the component terminal or the metal of the component terminal was not prepared properly before the solderability protection was added.
Electronics Forum | Fri Jun 10 19:42:46 EDT 2005 | ktron
Thank D.B. Cooper, actually this LED has 3 sides termination but no termination at underneath of LED. So this LED tends to float rather than performing solder joint during reflow process.
Electronics Forum | Thu Jun 16 22:07:16 EDT 2005 | davef
Chris As you imply, testing board and component solderability prior to assembly is preferred. * ANSI/J-STD-002 - Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires * ANSI/J-STD-003 - Solderability Tests for Printed Boa
Electronics Forum | Wed Oct 18 08:00:53 EDT 2006 | davef
Have you tested the solderability of the inbound components per ANSI/J-STD-002, Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires?
Electronics Forum | Tue May 29 09:58:32 EDT 2007 | davef
Is the component solderable per ANSI/J-STD-002, Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires?