Electronics Forum | Tue Feb 18 14:46:38 EST 2020 | bilalfarooqi
Hi all, We were able to fix the issue. We replaced the MOT cards with the MOT cards in the good machine. That, however, did not resolve the issue. The issue was very basic; one of the fuses (fi fuse) located to the left of the MOT cards became open.
Electronics Forum | Wed Aug 05 18:06:34 EDT 2020 | smittym
So I have a old TpSys system running on a TP9-2U and I can't get the initializing hardware when I boot the unit. Once the program loads the computer freezes if I select any of the drop menu items. I can however get it to initialize if I go into Servi
Electronics Forum | Tue Oct 27 15:53:23 EDT 2009 | smtspecialist
Sr.Tech is absolutely right !!! This is where I had started, by changing all 4 brushes on the motor then I changed the connector since it was turning black (Mydata have a retrofit connector assy for that!, you can do your own also!) After trying thos
Electronics Forum | Mon Mar 29 18:17:48 EST 2004 | kerryn
It should be noted that some of the main reasons to change from manual cleaning to automated stencil cleaning are: � Manual cleaning is not consistent � quality is totally in the operators hands � Contamination left on the stencil and in the aperture
Electronics Forum | Mon Jul 24 15:10:37 EDT 2006 | carln
Here are some additional comments that have been posted on the CircuitNet web site: Fist, the answer is the same regardless of the specific paste type, (leaded or non-leaded). High pressure sprays should never be applied to a stencil. Stencils are
Electronics Forum | Thu Mar 04 20:50:26 EST 2004 | Mike Konrad
There are several companies that manufacturer stencil cleaning systems. They include: Aqueous Technologies www.aqueoustech.com Smartsonic www.smartsonic.com EMC www.emcgti.com PMR www.pmrsystems.com JNJ www.jnj-industries.com UnitDesign www.un
Electronics Forum | Thu Mar 10 23:23:56 EST 2005 | pmd
We have a MyData TP-9-2 with a in line Y wagon. It is a long screw and the vintage is 1994. The Y wagon vibrates at about 24 micrometers at about 25 hertz. Burnin reviels zero encoder pulse errors. Hystersis test indicates a Y axis Y wise varance of
Electronics Forum | Thu May 05 09:50:29 EDT 2005 | patrickbruneel
Hi Hannu, You just gave a very realistic and practical view of the lead-free dilemma. The main reason that your coil coating doesn't get removed is because of the inability of lead free alloys to wet the surface and conduct the heat. Higher temperat
Electronics Forum | Mon May 09 10:52:29 EDT 2005 | patrickbruneel
Hannu, First and for all I have a problem with your question "tried and trusted" for the simple reason that you are going to change too lead-free. Ultrasonic soldering or welding is not new, as far as I know it is only used applying the ultrasonic
Electronics Forum | Wed Nov 16 05:12:36 EST 2011 | bobpan
A couple of things i would try: 1. Does function 30 give you a nozzle height that is repeatable. The number should be around 200.....+/- 20 or so. 2. I would change the z-rod because the spring could be worn out and when the vacuum turns on....it ca