Electronics Forum: vitronics and solder (Page 6 of 118)

Palladium finish and solder balls

Electronics Forum | Fri Jun 28 04:10:24 EDT 2002 | robbied

Great, now at least I have an explanation of sorts. Thanks, Dave.

wave soldering and solder bridge

Electronics Forum | Mon Dec 17 13:58:54 EST 2007 | ck_the_flip

I made my own wave measuring device using KIC2000 system. KIC2000 has automatic wave detection, so now I have a profiler for both reflow ovens and wave solder. The delmat carrier only cost $500. A guy, Samir, from this forum gave me the idea, actu

wave soldering and solder bridge

Electronics Forum | Mon Dec 17 11:55:08 EST 2007 | chef

I recently had the same problems, solder bridges on every thing I made, different customers boards, etc. I wave with no-clean flux. As I sorted out problems (pin holes, blow holes, splatter, etc.) I found a lot of variable factors. I changed flux,

Re: solder balls and flux

Electronics Forum | Wed Mar 01 16:58:03 EST 2000 | Dave F

Robert: On your balls: Solder suppliers make several "standard balls" and can advise you. On your cleaner: Recycling water / direct to drain? Most batch cleaner suppliers can advise you on recycling and filtering systems to keep you out of troub

Re: solder balls and flux

Electronics Forum | Wed Mar 01 16:58:03 EST 2000 | Dave F

Robert: On your balls: Solder suppliers make several "standard balls" and can advise you. On your cleaner: Recycling water / direct to drain? Most batch cleaner suppliers can advise you on recycling and filtering systems to keep you out of troub

wave soldering and solder bridge

Electronics Forum | Mon Dec 17 19:01:45 EST 2007 | bbarton

As someone with a LOT of experience with the "low cost" alternative alloys, primarily SACX, I have one simple question....Are these shorts a new phenomena? WAS your process in control, and all of a sudden it's not? If the answer is YES, take a look a

Re: solder balls and flux

Electronics Forum | Wed Mar 01 10:46:26 EST 2000 | Robert Hartmann

Kelvin, Thanks for the help. The actual opening size is .440 mm, but I think what you said makes sense. After discussing with the customer, it looks like it is the height which matters, more than the diameter. We have learned that the height of t

Re: solder balls and flux

Electronics Forum | Wed Mar 01 10:46:26 EST 2000 | Robert Hartmann

Kelvin, Thanks for the help. The actual opening size is .440 mm, but I think what you said makes sense. After discussing with the customer, it looks like it is the height which matters, more than the diameter. We have learned that the height of t

Selective soldering pallets and solder balls

Electronics Forum | Fri Dec 06 18:13:15 EST 2002 | slthomas

We only have solder balling problems in the interface of the pcb with the selective soldering pallet. All other boards (single, and double sided glue and waved alike) are fine, so I'm not thinking this is going to follow the normal path for resoluti

Evalution on solder paste and spray flux

Electronics Forum | Wed Jan 26 20:52:06 EST 2005 | Chua

Hi, I'm going to evalute new solder paste and flux for wave-solder. Appreciate you could advise what are the things need to look out during the evalution. Any recommend step or proper way of doing solder paste and flux evalution. Appreciate your he


vitronics and solder searches for Companies, Equipment, Machines, Suppliers & Information