Electronics Forum | Mon Mar 11 09:38:05 EDT 2013 | markhoch
Maybe I misinterpreted, because different people have different names for different devices, (i.e... I believe that the device that you refer to as your "surveyor", I refer to as a "profiler"), but did you already determine that your oven thermocoupl
Electronics Forum | Tue Jun 03 08:33:06 EDT 2014 | patel_daxa29
Do I need to lower temperature of bottom zone (for common size parts) while reflow 2nd side of the board or I should be using same profile as I used for 1st side reflow? Will parts on bottom side will stay in place without changing temperature?
Electronics Forum | Tue Jun 03 12:08:14 EDT 2014 | emeto
I don't think you decide that based on the oven. More important is what kind of parts you have on the board. If you have big heavy parts you should run them as second side.Of course you have the option to put glue under the suspicious part and run it
Electronics Forum | Fri Jan 12 11:46:26 EST 2018 | emeto
I don't know this exact oven, but usually it goes like that: First is a three phase power, then it is a contactor that is switching the power for the heaters and fans. than there are transformers for lower voltages. then there might be UPS system in
Electronics Forum | Thu Oct 28 20:13:39 EDT 2004 | grayman
The same with Russ, I would look at Vitronics and BTU. based on my experience they give best results especially on the profile. Maintenace is also superb! BTU has modular blower, heater T/C assy. Vitronics is "XPM - NO PM System" Now, BTU offers lif
Electronics Forum | Mon Sep 27 06:43:59 EDT 2021 | sophyluo1985
Some thoughts of GOLDLAND: We recommend that you choose Vitronics or Heller brands. They are the most popular machines in the world. According to the long-term plan, your equipment needs maintenance and replacement parts in the future, so their parts
Electronics Forum | Thu May 19 08:05:53 EDT 2005 | wigeon@telia.com
Hi, We are based in Korea, a manufacturer of > electronics for automotives. We are a small > company, so no "corporative discount" is > applicable to us. > > We currently have 2 SMT > lines and are about to invest one more. Our > production is
Electronics Forum | Wed Aug 31 14:32:12 EDT 2011 | cbeneat
We run 3 XPM2's. All were new so under warranty, but I've found the support to be excellent over the years. They have moved their operation to MO recently, time will tell if this is an issue. The only maintenance issue I've run into is on our oldest
Electronics Forum | Mon Mar 11 09:46:04 EDT 2013 | cyber_wolf
The surveyor is a a plate that I use to "survey" or verify the oven on a weekly basis. The data logger or profiler is the actual unit that follows the board through the oven to take readings. I don't think the zone thermo couple that measures temp a
Electronics Forum | Thu Mar 14 13:48:18 EDT 2013 | cyber_wolf
The entire oven is clean there are no blockages and the heater plates are brand new. I have worked with Vitronics technical support and gone through this thing with a fine tooth comb. I have even gone as far as to compare the exhaust and intake cap c