Electronics Forum | Fri Jun 23 09:01:01 EDT 2000 | Dave F
Gary: According to what I was try to say, you have read me correctly. NOW ... I would not pay much attention to my 100�C delta T babbling. It is in our work instruction for setting-up the wave, but no one pays attention to it. And I, nor anyone e
Electronics Forum | Thu Jul 18 12:17:30 EDT 2002 | pjc
Machine efficiency is a big one. Placement and auto-insertion machines should have the production rate for a given product recorded in the Routing, Time Standard or Work Instruction. If a given board has a tact time of say 1 minute and you ran 1,000
Electronics Forum | Tue Nov 13 16:54:29 EST 2007 | unisoft
Hi Try Unisoft (founded 1986) they are reasonibly priced and program your assembly machine from either gerber or CAD - 203-913-0782. The software you need is called ProntoPLACE ( http://www.unisoft-cim.com/pcbplace.htm ). Programs and optimizes P
Electronics Forum | Wed Sep 30 11:33:55 EDT 2015 | dyoungquist
Basically ISO doesn't care what you are building. They only care that you document what/how you are building it and follow that documentation every time. Recently my company lost some EMS business because we were not ISO certified even though we do
Electronics Forum | Fri Oct 02 22:32:18 EDT 2015 | ercdave1
ISO certified and registered is the same thing. Being ISO registered or certified means that you have a quality system that is consistent and measurable. It seems like a big waste of time until you implement it. It measures your performance, equi
Electronics Forum | Wed Oct 09 17:05:36 EDT 2019 | slthomas
I think you answered your own question by providing new information. If your AOI isn't capable of catching the vast majority of SMT soldering issues and you're SMT process isn't functioning at a very high level, you probably should count on inspect
Electronics Forum | Tue Aug 16 14:03:00 EDT 2022 | proceng1
We currently use Aegis CircuitCam for our Production work instructions, and machine programs. I am looking for an alternative, as CC is no longer supported. We receive Gerbers (sometimes CAD files) and BOM from our customers. That is all that I can
Electronics Forum | Mon Mar 03 02:11:35 EST 2008 | andrzej
I am working on instruction for potential customer about PCB design guidelines to make it easy for wave soldering (not selective). I have experience and have already gathered some info but I still need exact information about dimensions and distances
Electronics Forum | Tue Sep 21 10:50:21 EDT 2004 | Andy
We are in the same position like you. We are in a tug-of-war with our QA with regards to this process. Their reason is that the machine is used for quality purposes which is to verify BGA solder quality so it must be under Quality. From my experience
Electronics Forum | Sun Nov 19 16:01:18 EST 2000 | Dean
Hi Friend. I recently went through this same project in my factory. Initially, I spent quite a bit of time out on the lines (6) collecting data. After getting an overall idea of where and what the activities were I created forms and work instructio
