Electronics Forum | Thu Jul 01 16:02:45 EDT 2021 | willkillum
Greetings. Make sure the calibration/homing chip is still with the machine and not lost, although you can buy a replacement from Juki for a not-so-nominal fee. Also, have the seller power it up and bring up the Laser image display/edge check. If ther
Electronics Forum | Mon Aug 23 16:28:14 EDT 2021 | rodrigo
Hi all, One of our Fuji IP3 (we have two) keeps losing the proper data (proper, status, programs) when off for a couple of days or so. I changed the battery on the MP board (its voltage looked fine: 3.6v) but that didn't fixed it. I notice a super ca
Electronics Forum | Mon Sep 27 06:43:59 EDT 2021 | sophyluo1985
Some thoughts of GOLDLAND: We recommend that you choose Vitronics or Heller brands. They are the most popular machines in the world. According to the long-term plan, your equipment needs maintenance and replacement parts in the future, so their parts
Electronics Forum | Mon Dec 06 14:44:41 EST 2021 | dwl
1 to 1 stencil aperture to pad should be fine on the gull leads, and yield 100% coverage with leaded solder. The thermal pad is going to be a challenge though, if you truly need 100% coverage. There will be out gassing from the flux and this will nee
Electronics Forum | Thu Feb 24 00:37:08 EST 2022 | joshsvoboda
I have a pcb with an ENIG finish that is using a 144 pin LQFP and being soldered withSN100C/NC258 T4 paste. I used a oven profiler where the probes are taped down to the joint and the profiling software adjusts the program for the best profile for
Electronics Forum | Tue Apr 05 12:31:05 EDT 2022 | proceng1
A while back, we had a yellow coating showing up on some solder joints at Selective Solder (LEAD alloy). I contacted the company for our machine and he looked into it. One change we had made not too long before is we switched from Superior 75 to Sup
Electronics Forum | Fri Apr 29 23:57:24 EDT 2022 | auriga2001
I ran a SMT production line with and without SPI. I was also charged with gathering the time and defect metrics when we got our new SPI machine, comparing before and after implementation. It saved time on the printer because it didn't have to handle
Electronics Forum | Thu May 26 07:53:42 EDT 2022 | jojoled
Hi.Thanks for reply. 1. - I guess after JETting the paste, the head will go aside, to allow head with HD camera(SPI) to do the job.....and thus if used for AOI , the same camera will be much higher above components, not damaging anything....this is
Electronics Forum | Fri Jul 01 17:52:45 EDT 2022 | madisreivik
Hello ! I got very strange problem with Fuji IP3 (year 2000 something) MTU picks up the part and puts it on carrier conveyor Conveyor moves the part into main machine. All the positions are correct, centers etc.. But now, the main machine pick th
Electronics Forum | Mon Jul 25 17:57:48 EDT 2022 | glasscake
Assembleon (Yamaha Re-branded) machines have treated me well as I have 13 machines running any given day. Manuals are readily available in English but are more clear if you can read the original Japanese or Chinese versions. The biggest issue you
