Electronics Forum | Thu Apr 11 05:47:21 EDT 2002 | ianchan
Hi everyone, Does anyone have experience and applications knowledge, to help recommend a singulation machine? for depanelization process of a : 1) 0.65mm thickness PCBA, with 0603/0402 SMD, 2) with materials composition makeup of a 1.5oz copper,
Electronics Forum | Mon Feb 25 18:36:52 EST 2008 | jmelson
Our people have EXCELLENT reading skills, and for some stuff I do have a list of the order to assemble the parts, with some tricks, etc. called out. But, a color-coded assembly drawing is what we use the most. I use Sharpie markers to color-code th
Electronics Forum | Mon Mar 25 15:51:04 EST 2002 | davef
ASQC re-numbered the once free (taxpayer sponsored development) MIL-STD-105 as ASQ-Z1.4, slapped their own cover on it, and now charge $40 or $50 for the same document! The standards are identical, so see if you can get one of the old �MIL-STD's� and
Electronics Forum | Wed May 02 04:04:18 EDT 2007 | greg york
What aload of rubbish - prove it, we have over 320 users in the UK alone using the SACP0307 solder with great results, and the biggest advantage they have is they can multiple source the solder not stuck to one company who has purchased the patent an
Electronics Forum | Fri Sep 08 01:08:10 EDT 2017 | tsvetan
The material is 0.12mm stainless steel, electropolished it's thick for fine pitch but we have lot of other big components on the board which do not solder good if we use 0.1mm thickness stencil. The 0.3 mm apretures are big enough and have good rele
Electronics Forum | Tue Jun 23 22:14:16 EDT 2020 | kumarb
Hi. Guessing that you are operational by now? If not, consider to use BGA definition and use the editor to define where the bottom side pads are or are not. Just our 2 bits input. The Assembleon X / Yamaha units are quite flexible - using an electron
Electronics Forum | Tue Oct 31 20:42:56 EST 2000 | speedy-tech
Now we are face with tombstoning for component '0402',we have tried many ways,it seems no change,Below is our experient: 1,The thickness of stencil is 0.12mm,and the aperture is circle.the diameter is 0.55mm.The pads size is 0.5*0.6. 2 Ch
Electronics Forum | Thu Jun 05 21:59:22 EDT 2008 | mika
bsumfg, The very best anybody said lately!! This should go straight into the the manual! I totally agree with you; Just an add: The fid's should never be mistaken for a test point who normally is between 1.0 - 1.27 mm so make the fids 1.5 mm. round
Electronics Forum | Tue Jun 05 22:59:18 EDT 2007 | davef
There is no standard. Companies select a lower control limit based on the desired cleanliness. Guidelines to consider are: * With fresh resin beds, expect get 17.5 mohm-cm water into the final rinse and then it decreases from there. * Semiconducto
Electronics Forum | Sat Dec 12 04:21:13 EST 2009 | nkohler
Hello, We use SJ50 serie AOIs. I made a program which watches the .dat file and if an algorithm changes then my program makes a log file from the parameters of the modification. I know some numbers are which parameters, but I don't know all. I write
