Electronics Forum | Thu Apr 08 13:28:24 EDT 2010 | mabdalla
Thanks DucHoang, One more favor. Will really appreciate if you can point us on how to figure out the number of patterns (number of offsets) from the VIOS file. Also we would like to know the feeder types represented by the numbers in the &F sectio
Electronics Forum | Thu Jan 04 08:33:08 EST 2007 | davef
You cannot determine foil thickness from its weight per area, because of the significant variation in the density of electrodeposited [ED] copper. But people don't care. They do it regardless. (oz/ft2)||(mils)||(mm) 1/2||0.7||17.8 1||1.4||35.6 2||2
Electronics Forum | Mon Jul 01 16:45:31 EDT 2002 | pjc
Yeah, you'll get the blue button functionality w/ 1.6. That protects the machine by disabling the magazine before its pulled from the machine. It tells the computer not to pick from that mag. Going from 1.4.7 is the same as going from 1.5, just softw
Electronics Forum | Wed Oct 10 13:35:00 EDT 2001 | stepheno
I used to work with Chris. (neither of us are there anymore). What is he talking about is putting components into "pockets". The parts would come in, in sticks (tubes) but we wanted them in reels. At first we sent them out to be reeled, but that w
Electronics Forum | Mon Jul 26 17:21:20 EDT 1999 | Tom Terlizzi
any advice on ionograph testing in the 1 microgram/cm^2 for small devices. We have a old Alpha 500 series machine that is dead but ALpha doesn't service this vintage machine.Any other way to perform this test, or a third party vendors to service th
Electronics Forum | Thu Jul 15 11:28:24 EDT 1999 | Russ Supersano
I was wondering if someone could help me with a little problem I am Having with a MyData TP-11 UFP running TPSys 1.4.2. Early this week the machine crashed and I had to reload the software. I re-insatalled Venix then the CP4 driver then TPsys and Ser
Electronics Forum | Thu Sep 24 14:35:12 EDT 1998 | smd
Does anyone know where I can get conductive benchtops? NOTE: I don't want a mat and I'm already using (and unhappy with) a laminate surface glued to a wooden table. Any and all info would be very much appreciated. BTW: I'm also looking for conductive
Electronics Forum | Thu Jul 16 12:50:57 EDT 1998 | joe devaney
Dave, We have a rigging company that uses what we call airbags, the same principle like and upside-down air hockey puck. We have moved Fuji machines, verticle carousels (fully loaded with parts), reflow ovens etc. and wouldn't move another machine
Electronics Forum | Mon Mar 18 11:04:39 EST 2002 | slthomas
At a previous employer we used a pneumatic dental type drill with nice results. The 1/4" hose is much more flexible than a flex drive cable, there's no motor module on the work surface, and the foot pedal for the air a little more elegant than two-h
Electronics Forum | Fri Mar 22 21:31:25 EST 2002 | ianchan
Hi Guys, Anyone have "comments/testimony" on having possible quality level achievements, for AQL=0.1, C=0 ??? Is this a realistic "1st Pass Yield" expectation? how about for OQC submission Lots from production? especially in a high-mix, low-volu